EUKYX-199-4110_G5S2_Instruction_Vol4_E.pdf - 第233页

EUKYX 3-68 199-4100 3.5 T ray Feeder (Block2) Error ID Error Name, Description, Cause, and Remedy 4 418 0 8 Pre -c hec k Erro r of T r ay Feed er( Blo ck 2) T r ay Safet y Cove r(C enter) is o pen. Plea se cl ose T r ay …

EUKYX

3-67199-4100

3.5 Tray Feeder (Block2)

Error ID Error Name, Description, Cause, and Remedy

441618 Tray Feeder Zeroing Error (Block2)

The other pallet was detected from pallet store position during pulling.

-----

441619 Tray Feeder Zeroing Error (Block2)

Traverse zeroing error

-----

44161a Tray Feeder Zeroing Error (Block2)

Pallet chuck CLOSE error

-----

44161b Tray Feeder Zeroing Error (Block2)

Rack shutter CLOSE error

-----

44161c Tray Feeder Zeroing Error (Block2)

Magazine(Down) Error in shifting Pallet existence detection position.

-----

44161d Tray Feeder Zeroing Error (Block2)

Magazine(Up) Error in shifting Pallet existence detection position.

-----

44161e Tray Feeder Zeroing Error (Block2)

Missing detect sensor is detected although a pallet is stroed.

Please confirm whether Pallet is stored in Up/down magazine. All pallets are stored but

missing pallet is detected. Please adjust the missing detect sensor[B15406].

441801 Pre-check Error of Tray Feeder(Block2)

Tray power supply not turning on(power supply cut off from main machine)

-----

441802 Pre-check Error of Tray Feeder(Block2)

Main safety cover is open.

Please close Main safety cover, and press READY button to lock it.

441803 Pre-check Error of Tray Feeder(Block2)

Tray maintenance cover OPEN

-----

441804 Pre-check Error of Tray Feeder(Block2)

Traverse axis main circuit was cut off

-----

441805 Pre-check Error of Tray Feeder(Block2)

Safety circuit cut off

-----

441806 Pre-check Error of Tray Feeder(Block2)

Elevator axis main circuit cut off

-----

441807 Pre-check Error of Tray Feeder(Block2)

Tray Safety Cover(Upper) is open.

Please close Tray safety Cover(Upper), and then press READY button to lock it.

EUKYX

3-68199-4100

3.5 Tray Feeder (Block2)

Error ID Error Name, Description, Cause, and Remedy

441808 Pre-check Error of Tray Feeder(Block2)

Tray Safety Cover(Center) is open.

Please close Tray safety Cover(Center), and then press READY button to lock it.

441809 Pre-check Error of Tray Feeder(Block2)

Tray Safety Cover(Lower) is open.

Please close Tray safety Cover(Lower), and then press READY button to lock it.

44180a Pre-check Error of Tray Feeder(Block2)

Feeder base is not Ready On

Please confirm Feeder Cart set correctly, and press Feeder Base READY button.

44180b Pre-check Error of Tray Feeder(Block2)

No Magazine(Upper)

Please set Magazine(Upper).

44180c Pre-check Error of Tray Feeder(Block2)

No Magazine(Lower)

Please set Magazine(Lower).

44180e Pre-check Error of Tray Feeder(Block2)

Traverse axis Servo Alarm

-----

441810 Pre-check Error of Tray Feeder(Block2)

Elevator axis Servo Alarm

-----

441811 Pre-check Error of Tray Feeder(Block2)

Miss-Pickup comp. Detection 8mm[B15417]

-----

441812 Pre-check Error of Tray Feeder(Block2)

Miss-Pickup comp. Detection 14mm[B15418]

-----

441813 Pre-check Error of Tray Feeder(Block2)

Miss-Pickup comp. Detection 28mm[B15419]

-----

441814 Pre-check Error of Tray Feeder(Block2)

Pallet chuck is not shut

-----

441815 Pre-check Error of Tray Feeder(Block2)

The pallet Miss-Set is detected.

-----

441816 Pre-check Error of Tray Feeder(Block2)

Magazine(Lower) Rack Shutter on the operator side is open.

-----

441817 Pre-check Error of Tray Feeder(Block2)

Magazine(Lower) Rack Shutter on the Traverse side is open.

-----

EUKYX

3-69199-4100

3.5 Tray Feeder (Block2)

Error ID Error Name, Description, Cause, and Remedy

441818 Pre-check Error of Tray Feeder(Block2)

Magazine(Lower) is not done Positioning yet.

Please confirm the Magazine position and Magazine lock lever.

441819 Pre-check Error of Tray Feeder(Block2)

Elevator axis safety relay

-----

44181a Pre-check Error of Tray Feeder(Block2)

Magazine(Upper) Rack Shutter on the operator side is open.

-----

44181b Pre-check Error of Tray Feeder(Block2)

Magazine(Upper) Rack Shutter on the Traverse side is open.

-----

44181c Pre-check Error of Tray Feeder(Block2)

Magazine(Upper) is not done Positioning yet.

Please confirm the Magazine position and Magazine lock lever.

44181d Pre-check Error of Tray Feeder(Block2)

-----

441820 Pre-check Error of Tray Feeder(Block2)

Zeroing incomplete

-----

444001 Tray Feeder Sequence Error (Block2)

Tray feeder sequence timeout

-----

448302 Elevator Unit Exchange (Attach) (Block2)

Elevator Unit is not detected.

Please set up Tray Unit in Exchange location.

448303 Elevator Unit Exchange (Attach) (Block2)

Connector of Feeder base is not positioned correctly.

Please Operate it after connecting connector of Feeder Base.

448304 Elevator Unit Exchange (Attach) (Block2)

Connector of Tray is not positioned correctly.

Operate it after connecting connector of Tray.

448305 Elevator Unit Exchange (Attach) (Block2)

Time-out of Clamp operating of Elevator Unit.

-----

448306 Elevator Unit Exchange (Attach) (Block2)

Feeder Base is not in Upward position.

Please set Feeder Cart, and then press READY switch to rise it on Feeder Base.

448402 Elevator Unit Exchange (Detach) (Block2)

Time-out of Unclamp operating of Elevator Unit.

-----