EUKYX-199-4110_G5S2_Instruction_Vol4_E.pdf - 第64页

EUKYX 1-15 199-4100 2.5 Half-Y early Maintenance Objec t Unit Inspec tion, Cleaning, and Lubricating Spot Wor k Grease Require d T ool Check 4 .11 Noz zl e Sto cke r Section No zz le Sto cke r for H igh -s pe ed Nozz le …

100%1 / 363
EUKYX
1-14199-4100
2.4 Quarterly Maintenance
2.4 Quarterly Maintenance
Grease Symbols
MP1 : DAPHNE GREASE MP NO. 1
DE1 : DAPHNE EPONEX GREASE No. 3
NM1 : MOLYNOC GREASE AP1
Lubrication must be made on the *-marked items after initial month and every 3 months for the
subsequent use.
Object Unit
Inspection, Cleaning,
and Lubricating Spot
Work Grease Required Tool Check
4.1
Air Source
Filter
Cleaning
----- Air Filter Case Jig
4.2
Vacuum System
Filter
Cleaning
-----
4.4
Feeder Base
Driving Section
Worm Gear
Lubrication
NM1
4.6
Feeder Cart
Section (Cutter)
Linear Guide Lubrication MP1
Needle Bearing
Lubrication
MP1
4.7
Head Section
High-speed
Flexible Head
Nozzle U/D Ball Screw
(NL-Axis)
Cleaning,
Lubrication
MP1
Head U/D Ball Screw
(HL-Axis)
Cleaning,
Lubrication
MP1
Head U/D Linear Guide
(HL-Axis)
Cleaning,
Lubrication
MP1
Center Spline
Lubrication
MP1
Cam Follower Cleaning,
Lubrication
MP1
Nozzle Change Cam Face
(Upper Side)
Cleaning,
Lubrication
MP1
Vacuum Filter Change -----
Vacuum Nozzle Inspection -----
4.7
Head Section
Multi-Functional
Head
Ball Screw (3 locations) Lubrication MP1
Linear Guide
(3 locations)
Lubrication
MP1
Vacuum Filter
Change
----- Filter Attachment /
Detachment Jig
Vacuum Nozzle Inspection -----
4.8
X/Y Beam Section
* X-Axis Linear Guide Cleaning,
Lubrication
MP1
* Y-Axis Linear Guide Cleaning,
Lubrication
MP1
X-Axis Ball Screw Cleaning,
Lubrication
DE3
4.9
PCB Positioning
Section
* Ball Screw Cleaning,
Lubrication
MP1
Ball Bush Cleaning,
Inspection
MP1
4.10
Conveyor Section
* Linear Guide Cleaning,
Lubrication
MP1
Ball Screw Cleaning,
Lubrication
MP1
Notice
EUKYX
1-15199-4100
2.5 Half-Yearly Maintenance
Object Unit
Inspection,
Cleaning, and
Lubricating Spot
Work Grease Required Tool Check
4.11 Nozzle Stocker
Section
Nozzle Stocker
for High-speed
Nozzle
Nozzle Stocker
Sliding Area
Cleaning,
Lubrication
MP1 Rag for wiping oil
Shutter Flange Pin
Sliding Section
Cleaning,
Lubrication
NM1
Nozzle Stocker
Section
Nozzle Stocker
for Multi-
Functional
Nozzle
Nozzle Stocker
Sliding Section
Cleaning,
Lubrication
MP1 Rag for wiping oil
Shutter Flange Pin
Sliding Section
Cleaning,
Lubrication
NM1
4.12
Control Box Section
Filter
Cleaning
-----
4.13
Fans
Ventilating Fan Cleaning -----
Air-Intake Fan Cleaning -----
2.5 Half-Yearly Maintenance
Grease Symbols
IEL/V : BARRIERTA IEL/V
Object Unit
Inspection, Cleaning,
and Lubricating Spot
Work Grease Required Tool Check
4.8
X/Y Beam
Section
X-Axis Cable Side Face Cleaning,
Lubrication
IEL/V Rag for wiping oil, Brush
X-Axis Cable Fixing
Places
Inspection
----- -----
X-Axis Liner Scale Cleaning ----- Rag
Y-Axis Cable Side Face
Cleaning,
Lubrication
IEL/V Rag for wiping oil, Brush
Y-Axis Cable Fixing
Places
Inspection
----- -----
Y-Axis Liner Scale Cleaning ----- Rag
2.6 Yearly Maintenance
Object Unit
Inspection, Cleaning,
and Lubricating Spot
Work Grease Required Tool Check
4.6
Feeder Cart
Section (Cutter)
Fluorine Sheet Change ----- Screwdriver, Wrench
Urethane Clamp Assy Change ----- Screwdriver, Wrench
Flat Ring
Change
----- Screwdriver, Wrench, Torque
driver
EUKYX
1-16199-4100
3. Maintenance Spots
3. Maintenance Spots
3.1 Whole View
Any operations with a cover(s) being removed are included.
After the maintenance work, be sure to attach the cover.
Front View of Machine
Air Source
Vacuum System
Feeder Cart Section
F4A6
(a) Refer to “4. Inspection, Cleaning, and Lubrication Spots” and the subsequent items for
the detailed information on the spots of each section to be maintained and how to
maintain them.
(b) As for the options, refer to each instruction manual of the specially specified devices for
the maintenance.
Notice
Reference