EUKYX-199-4110_G5S2_Instruction_Vol4_E.pdf - 第157页
EUKYX 2-28 199-4100 3.2 Machine Information list Err C od e (HEX ) Di spl ay Are a A Di spl ay Are a B 809502 Lib rar y Fee der T y pe chec k Library Component Configuratio n differs from Feeder . Please set [T a pe th i…
EUKYX
2-27199-4100
3.2 Machine Information list
Err Code
(HEX)
Display Area A Display Area B
803202
SL feeder loading
operation
Component verification was carried out, but the tape was not
detected.
803203
SL feeder loading
operation
Loading of the SL feeder.
803204
SL feeder loading
operation
Since the tape end was detected, placement from SL feeder is
moved forward.
803205
SL feeder loading
operation
Placement cycles of both heads are postponed together for SL
feeder loading.
804001 P.C.B. insert alarm
P.C.B. inserted in the Input conveyor. Please remove the inserted
P.C . B . .
804002 P.C.B. insert alarm
P.C.B. inserted in the Output conveyor. Please remove the inserted
P.C . B . .
805001
Backup base out-of-
step detection
Out-of-step detection was carried out with the positioning axis (left).
Adjust the position of the slit cam for out-of-step detection. Check
whether the sensor for slit detection is disconnected.
805002
Backup base out-of-
step detection
Out-of-step detection was carried out with the positioning axis
(right). Adjust the position of the slit cam for out-of-step detection.
Check whether the sensor for slit detection is disconnected.
805003
Backup base out-of-
step detection
Out-of-step detection was carried out with the positioning axis
(A-lane/left). Adjust the position of the slit cam for out-of-step
detection. Check whether the sensor for slit detection is
disconnected.
805004
Backup base out-of-
step detection
Out-of-step detection was carried out with the positioning axis
(A-lane/right). Adjust the position of the slit cam for out-of-step
detection. Check whether the sensor for slit detection is
disconnected.
805005
Backup base out-of-
step detection
Out-of-step detection was carried out with the positioning axis
(B-lane/left). Adjust the position of the slit cam for out-of-step
detection. Check whether the sensor for slit detection is
disconnected.
805006
Backup base out-of-
step detection
Out-of-step detection was carried out with the positioning axis
(B-lane/left). Adjust the position of the slit cam for out-of-step
detection. Check whether the sensor for slit detection is
disconnected.
806001
Bad Mark transfer
information
mismatching
Bad Mark transfer information and PP data have mismatching. Bad
Mark inspection is carried out.
809201
Library tape width
check
The tape width in library and the feeder are not in agreement. Please
check the library and feeder.
809301
Library Feed Pitch
check
Library Feed Pitch differs from Feeder. Please check Library and
Feeder.
809401
Library component size
check
Library Component size differs from Feeder. Please check Library
and Feeder.
809402
Library component size
check
Library Component size X is too large to a feeder. Please check
Library and Feeder.
809403
Library component size
check
Library Component size X is too small to a feeder. Please check
Library and Feeder.
809404
Library component size
check
Library Component size Y is too large to a feeder. Please check
Library and Feeder.
809405
Library component size
check
Library Component size Y is too small to a feeder. Please check
Library and Feeder.
809501
Library Feeder Type
check
Library Component Configuration differs from Feeder. Please use
Tape thickness extended Feeder.
EUKYX
2-28199-4100
3.2 Machine Information list
Err Code
(HEX)
Display Area A Display Area B
809502
Library Feeder Type
check
Library Component Configuration differs from Feeder. Please set
[Tape thickness extended Feeder] in [Use].
809503
Library Feeder Type
check
Library Component Configuration differs from Feeder. Please check
Library and Feeder.
809c01 Motor system error
(System Error : 0xE400) Communication not establish with Servo
Amp (XY Beam).
809c02 Motor system error (System Error : 0xE405) Servo Amp parameter error.
809c03 Motor system error
(System Error : 0xE400) Communication not establish with Servo
Amp (Head).
809c04 Motor system error The system error occurred in SSCNET.
809d01
Recycle conveyor filled
up
Recycle conveyor became Full. (Block1)
809d02
Recycle conveyor filled
up
Recycle conveyor became Full. (Block2)
809e01 Automatic Teaching
Please skip it because Automatic modification Teaching is
impossible in Nozzle position of Head1.
809e02 Automatic Teaching
Please skip it because Automatic modification Teaching is
impossible in Nozzle position of Head2.
809f01
Confirm Tray Safety
Cover
There is no magazine. Magazine 1 (Lower).
809f02
Confirm Tray Safety
Cover
Rack shutter of operator side is open. Magazine 1 (Lower)
809f03
Confirm Tray Safety
Cover
Rack shutter of traverse side is open. Magazine 1 (Lower)
809f04
Confirm Tray Safety
Cover
The Magazine is not set correctly. Magazine 1 (Lower)
Check lock lever of magazine.
809f05
Confirm Tray Safety
Cover
There is no magazine. Magazine 2 (Upper).
809f06
Confirm Tray Safety
Cover
Rack shutter of operator side is open. Magazine 2 (Upper)
809f07
Confirm Tray Safety
Cover
Rack shutter of traverse side is open. Magazine 2 (Upper)
809f08
Confirm Tray Safety
Cover
The Magazine is not set correctly. Magazine 2 (Upper)
Check lock lever of magazine.
809f09
Confirm Tray Safety
Cover
Motor Error of Magazine (Lower) is detected.
809f0a
Confirm Tray Safety
Cover
Motor Error of Magazine (Upper) is detected.
80a001 Recognition Error Failed in the recognition of the part. Please retry pickup of the part.
80a002 Recognition Error Nozzle position teaching failure. Check nozzle condition.
80a003 Recognition Error
It failed in the light emitter recognition of the side view camera.
Please confirm the light emitter of the side view camera.
80a101
Reading the Side view
camera sensor Version
The operation for turning on is invalid. Please do operation again
after turning on completely.
80b001
Automatic Teaching
Error
Failed in the recognition. Carr it out again on the next time. Please
carry out cleaning of a nozzle, cleaning of a reference mark, and
re-instruction based on head rotations.
80b002
Automatic Teaching
Error
The jam for a nozzle was detected (Recognition). Please carry out
cleaning of a nozzle
80c001 Tray turning on
Failed in turning on Driver power of Tray (Block1) Magazine1
(Lower).Please confirm the wiring of Machine
EUKYX
2-29199-4100
3.2 Machine Information list
Err Code
(HEX)
Display Area A Display Area B
80c002 Tray turning on
Failed in turning on Driver power of Tray (Block1) Magazine1
(Upper).Please confirm the wiring of Machine
80c003 Tray turning on
Failed in turning on Driver power of Tray (Block2) Magazine2
(Lower).Please confirm the wiring of Machine
80c004 Tray turning on
Failed in turning on Driver power of Tray (Block2) Magazine2
(Upper).Please confirm the wiring of Machine
80c101
Tray ACV miss-
placement error (Step)
Error of miss-placement : Tray (Block1) Magazine1 (Lower)
80c102
Tray ACV miss-
placement error (Step)
Error of miss-placement : Tray (Block1) Magazine2 (Upper)
80c103
Tray ACV miss-
placement error (Step)
Error of miss-placement : Tray (Block2) Magazine1 (Lower)
80c104
Tray ACV miss-
placement error (Step)
Error of miss-placement : Tray (Block2) Magazine2 (Upper)
80c201
Tray ACV miss-
placement error
(Magazine)
Tray (Block1) Magazine1 (Lower) Cannot use it in AUTO OPN MODE
(PLACEMENT) because of miss-placement.
80c202
Tray ACV miss-
placement error
(Magazine)
Tray (Block1) Magazine2 (Upper) Cannot use it in AUTO OPN MODE
(PLACEMENT) because of miss-placement.
80c203
Tray ACV miss-
placement error
(Magazine)
Tray (Block2) Magazine1 (Lower) Cannot use it in AUTO OPN MODE
(PLACEMENT) because of miss-placement.
80c204
Tray ACV miss-
placement error
(Magazine)
Tray (Block2) Magazine2 (Upper) Cannot use it in AUTO OPN MODE
(PLACEMENT) because of miss-placement.
80c301
Tray Safety Cover Lock
cleared (Auto Run)
Cannot clear Lock because Cmpnt shortage is not found on Tray
(Block1) Magazine1 (Lower).
80c302
Tray Safety Cover Lock
cleared (Auto Run)
Cannot clear Lock because Cmpnt shortage is not found on Tray
(Block1) Magazine2 (Upper).
80c303
Tray Safety Cover Lock
cleared (Auto Run)
Cannot clear Lock because Cmpnt shortage is not found on Tray
(Block2) Magazine1 (Lower).
80c304
Tray Safety Cover Lock
cleared (Auto Run)
Cannot clear Lock because Cmpnt shortage is not found on Tray
(Block2) Magazine2 (Upper).
80c401 Nozzle Exchange
There is no nozzle required for production. Please check the
following.
1. Existence of Nozzle Stocker, Clamp Condition
2. Nozzle Configuration Data
80c402 Nozzle Exchange
A nozzle cannot be stored. Please check the following.
1. Existence of Nozzle Stocker, Clamp Condition
2. Nozzle Configuration Data
80c403 Nozzle Exchange ODD Noz of Head is stored for storing high-speed Noz.
80c404 Nozzle Exchange Noz is stored due to error in teaching Noz Position.
80c405 Nozzle Exchange Please take down the nozzle stocker.
80c406 Nozzle Exchange
A necessary nozzle is installed in the head that has not been
selected. Please select the back and forth block, and execute the
nozzle exchange.
80c501
Overall Setup
(Exchange support pin)
Pattern Program data set the support pin as [No exchange], so that
skipped it.
80c502
Overall Setup
(Exchange support pin)
Noz is not for Support Pin Exchange, so that it is stored.