EUKYX-199-4110_G5S2_Instruction_Vol4_E.pdf - 第122页
EUKYX 1-73 199-4100 5.7 Nozzle Filter Insertion Procedure (3 ) Set t he high- spe ed nozzle st ocker which shut ter is op en to the filt er remove suppor t jig. High-speed nozzle stocker Filter remove support jig F4A73A …
EUKYX
1-72199-4100
5.7 Nozzle Filter Insertion Procedure
• Filter replacement jig for 15 high-speed nozzles
Prepare following items in advance.
• Replacement part of high-speed nozzle stocker for G5S/G5S2 (KYB-M3806-000)
• High-speed nozzles for G5S/G5S2
• Filter replacement jig (KYX-M3807-000)
• Filter remove support jig (KYX-M3852-000)
• Filter remove pin (KYX-M381A-000)
• Tweezers (KYB-M380Y-000)
Filter remove
support jig
Filter remove pin
Filter replacement jig
Filter replacement jig
(Acrylic block)
Replacement part of
high-speed nozzle stocker
F4A71A
(1) Slide the nozzle stocker shutter to keep it opening.
(2) Store high-speed nozzles in the high-speed nozzle stocker. Make sure that each hole for
filter remove pin of all nozzles locate the positions as below.
Stocker shutter
High-speed nozzle
Hole for filter
remove pin
F4A72A
Procedure
EUKYX
1-73199-4100
5.7 Nozzle Filter Insertion Procedure
(3) Set the high-speed nozzle stocker which shutter is open to the filter remove support jig.
High-speed
nozzle stocker
Filter remove support jig
F4A73A
(4) Insert filter remove pin into the hole on nozzle to push out air filter in the nozzle.
Air filter
Filter remove pin
F4A74
Do not reuse removed air filter.
(5) Detach acrylic block of filter replacement jig. Set new air filters in the filter positioning
holes in the jig.
Tweezers
Filter positioning hole
Air filter
Filter replacement jig
F4A75A
Insert air filter fully into the hole with tweezers for line accessory (KYB-M380Y-000) or similar
tool.
Note
Note
EUKYX
1-74199-4100
5.7 Nozzle Filter Insertion Procedure
(6) Return the acrylic block to the filter replacement jig. Set the high-speed nozzle stocker
which shutter is open to the filter replacement jig.
Acrylic block
High-speed
nozzle stocker
F4A76A
Check that no air filter remains in nozzles once again before replacing with new air filters.
If nozzles are set in the opposite direction;
If setting nozzles in the opposite direction, loosen 5 bolts on bottom of filter replacement jig.
Attach the block mount surface of nozzle stocker to the opposite side.
Nozzle stocker
(opposite direction)
Bottom of jig
Block mount surface
5 bolts
Pin hole
(opposite direction)
F4A78
(7) Press the metal pusher of filter replacement jig to insert air filters into nozzles.
Metal pusher
F4A77A
(8) Check that air filters are fully inserted.
Note