EUKYX-199-4110_G5S2_Instruction_Vol4_E.pdf - 第78页

EUKYX 1-29 199-4100 4.6 Cutter Section 4.6 C utter Section 4.6. 1 Cut ter Unit cleaning C yc le : Ever y 3 Mo nths (Required Time : 20 m inutes) CAUTION After making sure that the power supply has been stopped, start mai…

EUKYX

1-28199-4100

4.5 Feeder Cart Section

Scrap Box

Every Day Cleaning

Required Time:1minute

When the scrap box is filled with the tape with

no components, draw the scrap box out and

remove such tape.

Reel Box

Every Day Cleaning

Required Time:5minutes

Clean the dust and debris at the bottom of the

reel box using a vacuum cleaner, or open the

cover and drop any dust and debris into the

scrap box.

F4A22

EUKYX

1-29199-4100

4.6 Cutter Section

4.6.1 Cutter Unit cleaning

Cycle: Every 3 Months (Required Time : 20 minutes)

CAUTION

After making sure that the power supply has been stopped,

start maintenance. During maintenance, do not touch the

cutter blade.

(1) Remove the truss head screws (1 each on left and right) mounting the lower slope. Loosen

the truss head screws at the bottom (1 each on left and right). Detach the lower slope.

Cutter unit

Upper slope

Lower slope

Truss head screw (front side)

Truss head screw (Bottom side)

F4A27AA

(2) Remove hex socket head cap screws mounting the cutter unit (1 each on left and right).

Hex socket head cap screw

F4A27B

Procedure

EUKYX

1-30199-4100

4.6 Cutter Section

(3) Pull out the cutter unit main body forward. Remove 3 unit connection connectors. At this

point, make sure not to tear off the connector cables by pulling them forcibly. Additionally,

take care that the connector cables are not trapped when returning the unit to the original

position.

Connection connectors (3 pcs)

Connector

cable

Front

Cutter unit main body

F4A27C

(4) Remove hex socket head cap screws mounting the upper slope (2 each on the left and

right). Detach the upper slope.

Hex socket head cap screws

Upper slope

F4A27D