EUKYX-199-4110_G5S2_Instruction_Vol4_E.pdf - 第65页

EUKYX 1-16 199-4100 3. Maintenance Spots 3 . Main tenanc e Spots 3. 1 Whole View Any ope rations with a cover(s) being remove d are included. Aft er the maintenance work, be su re to at tach the cover . Front View of Mac…

100%1 / 363
EUKYX
1-15199-4100
2.5 Half-Yearly Maintenance
Object Unit
Inspection,
Cleaning, and
Lubricating Spot
Work Grease Required Tool Check
4.11 Nozzle Stocker
Section
Nozzle Stocker
for High-speed
Nozzle
Nozzle Stocker
Sliding Area
Cleaning,
Lubrication
MP1 Rag for wiping oil
Shutter Flange Pin
Sliding Section
Cleaning,
Lubrication
NM1
Nozzle Stocker
Section
Nozzle Stocker
for Multi-
Functional
Nozzle
Nozzle Stocker
Sliding Section
Cleaning,
Lubrication
MP1 Rag for wiping oil
Shutter Flange Pin
Sliding Section
Cleaning,
Lubrication
NM1
4.12
Control Box Section
Filter
Cleaning
-----
4.13
Fans
Ventilating Fan Cleaning -----
Air-Intake Fan Cleaning -----
2.5 Half-Yearly Maintenance
Grease Symbols
IEL/V : BARRIERTA IEL/V
Object Unit
Inspection, Cleaning,
and Lubricating Spot
Work Grease Required Tool Check
4.8
X/Y Beam
Section
X-Axis Cable Side Face Cleaning,
Lubrication
IEL/V Rag for wiping oil, Brush
X-Axis Cable Fixing
Places
Inspection
----- -----
X-Axis Liner Scale Cleaning ----- Rag
Y-Axis Cable Side Face
Cleaning,
Lubrication
IEL/V Rag for wiping oil, Brush
Y-Axis Cable Fixing
Places
Inspection
----- -----
Y-Axis Liner Scale Cleaning ----- Rag
2.6 Yearly Maintenance
Object Unit
Inspection, Cleaning,
and Lubricating Spot
Work Grease Required Tool Check
4.6
Feeder Cart
Section (Cutter)
Fluorine Sheet Change ----- Screwdriver, Wrench
Urethane Clamp Assy Change ----- Screwdriver, Wrench
Flat Ring
Change
----- Screwdriver, Wrench, Torque
driver
EUKYX
1-16199-4100
3. Maintenance Spots
3. Maintenance Spots
3.1 Whole View
Any operations with a cover(s) being removed are included.
After the maintenance work, be sure to attach the cover.
Front View of Machine
Air Source
Vacuum System
Feeder Cart Section
F4A6
(a) Refer to “4. Inspection, Cleaning, and Lubrication Spots” and the subsequent items for
the detailed information on the spots of each section to be maintained and how to
maintain them.
(b) As for the options, refer to each instruction manual of the specially specified devices for
the maintenance.
Notice
Reference
EUKYX
1-17199-4100
3.1 Whole View
(Front Side of Machine)
(Rear Side of Machine)
Nozzle Stocker Section
PCB Positioning Section
Head Section
XY Beam Section
Component Recognition
Camera Section
Cutter Section
Feeder Base Driving Section
F4A7