EUKYX-199-4110_G5S2_Instruction_Vol4_E.pdf - 第79页

EUKYX 1-30 199-4100 4.6 Cutter Section (3 ) Pull out t he cut ter unit main bod y for ward. R emove 3 unit connection c onnect ors. At this point, mak e sure not to te ar off t he connec tor cab les by pulling them f orc…

EUKYX

1-29199-4100

4.6 Cutter Section

4.6.1 Cutter Unit cleaning

Cycle: Every 3 Months (Required Time : 20 minutes)

CAUTION

After making sure that the power supply has been stopped,

start maintenance. During maintenance, do not touch the

cutter blade.

(1) Remove the truss head screws (1 each on left and right) mounting the lower slope. Loosen

the truss head screws at the bottom (1 each on left and right). Detach the lower slope.

Cutter unit

Upper slope

Lower slope

Truss head screw (front side)

Truss head screw (Bottom side)

F4A27AA

(2) Remove hex socket head cap screws mounting the cutter unit (1 each on left and right).

Hex socket head cap screw

F4A27B

Procedure

EUKYX

1-30199-4100

4.6 Cutter Section

(3) Pull out the cutter unit main body forward. Remove 3 unit connection connectors. At this

point, make sure not to tear off the connector cables by pulling them forcibly. Additionally,

take care that the connector cables are not trapped when returning the unit to the original

position.

Connection connectors (3 pcs)

Connector

cable

Front

Cutter unit main body

F4A27C

(4) Remove hex socket head cap screws mounting the upper slope (2 each on the left and

right). Detach the upper slope.

Hex socket head cap screws

Upper slope

F4A27D

EUKYX

1-31199-4100

4.6 Cutter Section

(5) Remove dirt and dust in the cutter unit with a vacuum cleaner.

Use a vacuum cleaner nozzle for narrow spaces

Shape of recommended

vacuum cleaner nozzle

F4A28

Cutter blade (bottom surface)

Cutter blade

(top surface)

F4A27E

Note