80S-2080F480F5.pdf - 第345页

SIPLACE 80S-20/F4/F5 User M anual 5 Vision Func tions 05/99 Issue from Software Vers ion SR.405.xx 5.6 Test Comp onent Line en gineer 5 - 113 Setting the contr ast sensitivity t o suppress defective struct ures and inten…

5 Vision Functions SIPLACE 80S-20/F4/F5 User Manual

5.6 Test Component 05/99 Issue from Software Version SR.405.xx

5 - 112 Line engineer

Setting the contrast sensitivity to intensify low-contrast fiducials

Select the following settings for low-contrast fiducials in order to intensify the contrast:

Fig. 5.6.32 Setting the contrast sensitivity to intensify low-contrast fiducials

SIPLACE 80S-20/F4/F5 User Manual 5 Vision Functions

05/99 Issue from Software Version SR.405.xx 5.6 Test Component

Line engineer 5 - 113

Setting the contrast sensitivity to suppress defective structures and intensify the contrast at

the same time

Select the following settings to suppress defective structures and at the same time to intensify the contrast

for low-contrast fiducials:

Fig. 5.6.33 Setting the contrast sensitivity to suppress defective structures and

to intensify the contrast at the same time

5 Vision Functions SIPLACE 80S-20/F4/F5 User Manual

5.6 Test Component 05/99 Issue from Software Version SR.405.xx

5 - 114 Line engineer

5.6.4.13

Measure Mode

Option

NOTE

This option can only be activated when a GF number has been loaded.

In this menu you can manipulate these measurement conditions. The menu options are primarily intended for

the description of non-standard components.

This option allows you to

– select and activate a particular measurement method or combination of several measurement methods

– deactivate individual measurement methods, and

– change the parameters belonging to each measurement method.

The hex parameters for the individual measuring methods can be modified in two ways:

– either indirectly, i.e. menu-driven

You will be guided by the package form manipulator by means of setting menus and explanatory text in

order to obtain the desired measuring results quickly and accurately.

– or directly, i.e. you enter the necessary hex parameters directly into the ’Measuring mode 2’ input box.

NOTE

Please note that entering the hex values directly requires considerable knowledge of the measuring

method sequence.

If you intend to enter or modify hex values directly, please contact Siemens Service first and do not enter

the bit-coded hex values until you have spoken to the Service Department.

We recommend that you generally use the menu-driven package form manipulator.