80S-2080F480F5.pdf - 第675页
SIPLACE 80S-20/F4/F5 User M anual 11 Station Extensions/Options 05/99 Issue from Software Version SR.405.xx 11.9 GEM Interface 11 - 59 1 1 .9 GEM Interface 1 1.9.1 Gener al Comm ents GEM => G eneric E quipment M odel …
11 Station Extensions/Options SIPLACE 80S-20/F4/F5 User Manual
11.8 Remote Service 05/99 Issue from Software Version SR.405.xx
11 - 58
11.8.6 Procedure and Operation
Make contact with your service center (in Munich, Alpharetta or Singapore) by telephone.
Follow the instructions of the engineer.
SIPLACE 80S-20/F4/F5 User Manual 11 Station Extensions/Options
05/99 Issue from Software Version SR.405.xx 11.9 GEM Interface
11 - 59
11.9 GEM Interface
11.9.1 General Comments
GEM =>
G
eneric
E
quipment
M
odel
SECS-II =>
S
emiconductor
E
quipment
C
ommunication
S
tandard, Part 2
Host => Communications computer
With the GEM / SECS-II interface it is possible to control a SIPLACE station using any host which is compati-
ble with GEM. However, the SIPLACE station must be left connected to the line computer to allow the
machine, set-up and cluster data to be programmed and loaded into the station. The SIPLACE station packs
these data into a placement program and makes this available to the host for reading. During operation, and
depending on the control mode, the host or the line computer provides the SIPLACE station with the neces-
sary machine, set-up and cluster data.
Fig. 11.9.1 General view of overall structure
Host
GEM
Line computer
LAN
SIPLACE 80 S-20
GEM
LAN
SIPLACE 80 F
4
SIPLACE 80 F
5
GEM
LAN
SIPLACE LAN
Customer‘s LAN
11 Station Extensions/Options SIPLACE 80S-20/F4/F5 User Manual
11.9 GEM Interface 05/99 Issue from Software Version SR.405.xx
11 - 60
11.9.2 Operation
11.9.2.1 Main Menu with GEM Interface Option
Fig. 11.9.2 Main view with GEM interface option
- Key to Fig. 11.9.2
1 To the
Control mode
menu 2 To the
GEM defaults
menu
3 To the
GEM interface
menus 4 The current control mode is displayed here.
5 GEM status display
2 31 4 5