CM88Maintenace1.pdf - 第107页
Page 1-69 REGULAR MAINTENANCE 1 Check Every 1000 Hours (Once T wo Months) <<Descriptions and Caution in Operation>> From “1-6-2 Cleaning and Greasing the Cam box 1” to “1-6-12 Cleaning and Greasing the Front …
Page 1-68
Check Every 1000 Hours (Once Two Months)
5. Checking the machine parameter after teaching (data check)
After “Head exchange teach,” check that machine parameter is within the tolerant range.
1. Press .
• The “Machine mainte menu” screen appears.
2. Press .
• The “Machine parameter menu” screen ap-
pears.
3. Press Data check .
∗ The message “Mach prmtr data normal”
appears.
∗ If some trouble is displayed, carry out “Nozzle
exchange teach” again, after checking that
item.
3Y3C-E-MMD01-A06-03
3Y3C-EEn-MpMm-001
3Y3C-EEn-MpMmHm-001
Page 1-69
REGULAR
MAINTENANCE
1
Check Every 1000 Hours (Once Two Months)
<<Descriptions and Caution in Operation>>
From “1-6-2 Cleaning and Greasing the Cam box 1” to “1-6-12 Cleaning and
Greasing the Front and Rear Conveyors” have the description of a sequence of
operation. When carrying out operation in the same period as the check every
1000 hours, you do not need to repeat the operation from “Returning to origin” to
“Opening the Safety Cover.” So the description about these procedures is only on
this page.
If you carry out the operation separately, make sure of doing the procedures from
“Returning to origin” to “Turning off the power.”
∗ Before starting operation, carry out “Return to
origin” on the “Machine adjustment menu”
screen. If they have already been done, this is
unnecessary.
1. Turn off the power.
2. Open the front safety cover.
3. Open the rear center safety cover and
upper cover.
R
E
L
E
A
S
E
T
R
I
P
O
F
F
O
N
R
E
S
E
T
4G3C-AB01
3Y3C-AI01
3Y3C-E-MMD01-A06-03
Page 1-70
Check Every 1000 Hours (Once Two Months)
1-6-2 Cleaning and Greasing the Cam Box 1
This unit has two cams which carry out the nozzle extension and nozzle retraction.
Clean the cam follower, lever fulcrum,
spring and cam face, then apply
grease.
(Oil : VALIANT U2)
1.Cam follower
Grease cam follower through grease nipple.
2.Lever fulcrum
Grease lever fulcrum through the grease
nipple.
3.Spring
Directly apply grease to hook and joint.
4.Cam face
Directly apply grease to cam face.
Rear side
2.
4.
Rear side
1.
3.
4G3C-AD01
01DKC2AA
01DKC2AB
3Y3C-E-MMD01-A06-03