CM88Maintenace1.pdf - 第125页
Page 1-87 REGULAR MAINTENANCE 1 Changing the Consumable Parts Every 1500 to 6000 Hours 2 . Apply grease to the movable blade and guide. (Oil : V ALIANT U2) ∗ Apply grease a little mainly to the oil groove and movable par…
Page 1-86
Changing the Consumable Parts Every 1500 to 6000 Hours
5. Loosen the bolts (M4) with a hexago-
nal wrench and remove the plate.
6. Remove the movable blade.
∗ Thread the bolts (M4) to the taps of movable
blade and pull it out.
2. Clean (change) and grease the movable blades.
1. Clean the movable blade, plate, and
guide.
∗ If foreign body is in the slot for movable blade,
blow off it with an air ejector.
∗ Change the damaged parts.
To the next page
Plate
Movable blade
3Y3C-055P
3Y3C-056P
3Y3C-057P
3Y3C-058P
3Y3C-E-MMD01-A07-01
Page 1-87
REGULAR
MAINTENANCE
1
Changing the Consumable Parts Every 1500 to 6000 Hours
2. Apply grease to the movable blade
and guide.
(Oil : VALIANT U2)
∗ Apply grease a little mainly to the oil groove
and movable part of guide.
3. Set the movable blade.
∗ It is not easy to set blade after applying grease.
Do not force to do it, but manage to align the
angle.
4. Set the plate.
5. Apply grease to the face to which the
cam follower of lever touches.
(Oil : VALIANT U2)
6. Set the lever.
7. Grease the grease nipple of lever
fulcrum.
(Oil : VALIANT U2)
8. Directly apply grease to the rod end.
(Oil : VALIANT U2)
9. Set the cover of cutting unit.
7. Grease nipple
Hole for cam follower
Guide
Oil groove
Rear side
3Y3C-059P
4G3C-401E
3Y3C-060P
3Y3C-061P
01DSC0AA
3Y3C-E-MMD01-A07-02
8.
Page 1-88
Changing the Consumable Parts Every 1500 to 6000 Hours
1-7-2 Changing the Vacuum Silicon Tube [1500 Hours]
Change the vacuum silicon tube under the elevating unit at the regular interval.
It can be removed and set easily by hand.
∗ Before starting operation, carry out “Return to
origin” on the “Machine adjustment menu”
screen. If they have already been done, this is
unnecessary.
1. Turn off the servo switch.
2. Open the rear center safety cover.
3. Change the vacuum silicon tubes.
4. Close the rear center safety cover.
5. Turn on the servo switch.
6. Move the main axis by steps, and
change the silicon tubes on other
elevating unit.
∗ Step movement of main axis
“1-4-1 Cleaning and Changing the
Nozzles”
∗ Check the operation at “Checking the vacuum
pressure at the tip of nozzle” after it.
“8. Checking the vacuum pressure at the
tip of nozzle” in “1-4-1 Cleaning and
Changing the Nozzles.”
Transfer head
Vacuum silicon tubeElevating unit
OFF ( )
ON ( )
SERVO
OFF ( )
ON ( )
SERVO
3Y3C-AG01
3Y3C-062P
3Y3C-063P
3Y3C-AI01
3Y3C-E-MMD01-A07-00