CM88Maintenace1.pdf - 第117页

Page 1-79 REGULAR MAINTENANCE 1 Check Every 1000 Hours (Once T wo Months) 3Y3C-E-MMD01-A06-01 Grease supplying procedure for the linearways D and E 1 . Press . • The “Machine adjustment menu” screen appears. 2 . Press Ou…

100%1 / 166
Page 1-78
Check Every 1000 Hours (Once Two Months)
3Y3C-E-MMD01-A06-01
Grease supplying spot for the linearways D and E
Supply grease to the sliders D and E of the No. 7 station from the pick-up side.
(Right side)
(Left side)
3Y3C-129P 3Y3C-130P
3Y3C-131P
3Y3C-132P
Linearway E
Exclusive nozzle
Linearway D
(Right side)
(Left side)
Exclusive nozzle
Page 1-79
REGULAR
MAINTENANCE
1
Check Every 1000 Hours (Once Two Months)
3Y3C-E-MMD01-A06-01
Grease supplying procedure for the linearways D and E
1. Press .
• The “Machine adjustment menu” screen
appears.
2. Press Output check .
• The “Output check” screen appears.
3. Press
UNLOCK
and .
• Change it to .
4. Press .
• The “Machine adjustment menu” screen
reappears.
5. Press Axis information .
• The “Axis information” screen appears.
Machine
adjust
3Y3C-EEn-Ma-001
3Y3C-EEn-MaOc-001
3Y3C-EEn-Ma-001
To the next page
Mount
Prohibit
Mount
Permission
1
2
Page 1-80
Check Every 1000 Hours (Once Two Months)
3Y3C-E-MMD01-A06-01
6. Turn off the servo switch.
7. Open the rear center safety cover.
8. Set the main axis motor at 600 ± 10
pulse by rotating it by hand.
9. Make sure of the grease supplying
spots, and supply grease to the
linearways D and E of the No. 7
station from the pick-up side.
10. By rotating the main axis motor by
hand again, shift the head to the next
one and set the main axis motor at
600 ± 10 pulse, then supply grease.
∗ Supply grease to all the 12 heads.
11. When you have supplied grease to all
the 12 heads, set the main axis at 0 to
30 pulse by rotating it by hand.
12. Press twice.
• The “Main menu” screen reappears.
OFF ( )
ON ( )
SERVO
3Y3C-AI01
Reverse rotation
3Y3C-113P
3Y3C-EEn-MaAi-003
Right rotation
3Y3C-EEn-MaAi-003