CM88Maintenace1.pdf - 第83页

Page 1-45 REGULAR MAINTENANCE 1 Check Every 560 Hours (Once a Month) 1-5-3 Cleaning the Chip Recognition Section The unit is for recognizing chips in the passing and reflecting methods and checking for the devia- tion of…

100%1 / 166
Page 1-44
Check Every 560 Hours (Once a Month)
1-5-2 Casting off NG Parts
Cast off the gathered NG parts. Clean also the surroundings of NG board.
1. Turn off the power.
2. Open the front safety cover.
3. Remove the NG box.
4. Cast off the NG parts.
5. Clean the surroundings of NG box.
6. Set the NG box.
R
E
L
E
A
S
E
T
R
I
P
O
F
F
O
N
R
E
S
E
T
4G3C-AB01
1
2
3Y3C-039P
3Y3C-085P
NG box
3Y3C-E-MMD01-A05-02
Page 1-45
REGULAR
MAINTENANCE
1
Check Every 560 Hours (Once a Month)
1-5-3 Cleaning the Chip Recognition Section
The unit is for recognizing chips in the passing and reflecting methods and checking for the devia-
tion of chips.
∗ Before starting operation, carry out “Return to
origin” and “Stage escape” on the “Machine
adjustment menu” screen. If they have already
been done, this is unnecessary.
1. Turn off the power.
2. Open the rear center safety cover.
3. Clean the top of chip recognition
camera with a soft and clean cloth.
R
E
L
E
A
S
E
T
R
I
P
O
F
F
O
N
R
E
S
E
T
Chip recognition camera
16EYC0AA
3Y3C-E-MMD01-A05-01
3Y3C-AI01
Page 1-46
Check Every 560 Hours (Once a Month)
1-5-4 Cleaning and Greasing the Board Holder and X-Y Table
Board holder is the unit for holding the board on X-Y table. X-Y table moves the board up and
down according to the thickness of chip, and moves to the mounting position, regulating the edge
of chip holder (as chip data).
1. Turn off the power.
2. Open the front safety cover.
Board holder
3. Clean the holder with vacuum clean-
ers.
∗ Remove waste or chips.
4. Clean the linear bearing or ball screw
and apply grease.
(Oil : ALBANIA 2)
1. Linear bearing
Apply grease to rail.
2. Gear
Directly apply grease to gear.
3. Ball screw
Apply grease to ball screw.
R
E
L
E
A
S
E
T
R
I
P
O
F
F
O
N
R
E
S
E
T
15ULC0AA
07JHC2AA01
3.
3.
1.
1.
3Y3C-E-MMD01-A05-02
1.
2.
X-Y table
4G3C-AB01