CM88Maintenace1.pdf - 第22页

Page 22 SAFETY PRECAUTIONS Be sure to observe CAUTION 3Y3C-E-MMD00-A03-02 M15E DO NOT PLACE ANY OBJECT AROUND EMERGENCY ST OP BUTTONS. Y ou will be unable to press a button to stop the machine in case of emergency . DO N…

Page 21

SAFETY PRECAUTIONS

Be sure to observe

3Y3C-E-MMD00-A03-02

WARNING

FIRMLY INSERT THE

POWER AND OTHER

PLUGS.

Imperfect plugging in may

cause fire because of electric

shock and generated heat.

Do not use the damaged plug

or loose outlet.

M87E

M88EB

DO NOT INSERT OR

REMOVE POWER AND

OTHER PLUGS BY

WET HAND.

If plugged in or unplugged by

wet hand, it may result in

electric shock.

USE THE SPECIAL-

IZED OUTLET AND

BREAKER EXCLU-

SIVELY.

If the breaker is shared be-

tween machines, it may cause

fire because of generated heat.

Check the dissipation power

in your Standard Specifica-

tion before consulting an

electrical contractor.

M89EB

M06E

GROUND THE MA-

CHINE PROPERLY.

There is a risk of an electric

shock or leak.

Consult a professional

electrical contractor.

PERIODICALLY REMOVE DUST

FROM POWER PLUG.

Dust on the plug may result in fire caused by

defective insulation because of moisture.

Pull out the power plug and wipe off dirt with dry

cloth.

If the machine is not going to be used for a long

period, turn off the breaker connected with the

machine.

M86E

DO NOT DAMAGE POWER AND

OTHER CORDS OR PLUGS.

Damaged cord and plug may cause electric shock,

short circuit or fire.

Hold the plug when plugging in or unplugging.

Cord and plug repairs should be attempted only

by the person competent to do the electrical

work, or contact the manufacturer.

M85E

Never damage, remake, bring

close to heating appliances, bend

forcibly, twist, pull, put heavy

objects on, and bundle up.

Page 22

SAFETY PRECAUTIONS

Be sure to observe

CAUTION

3Y3C-E-MMD00-A03-02

M15E

DO NOT PLACE ANY

OBJECT AROUND

EMERGENCY STOP

BUTTONS.

You will be unable to press a

button to stop the machine in

case of emergency.

DO NOT PLACE ANY

OBJECTS ON THE

COVER.

The cover may break due to the

weight of the objects and injure

you.

M16EB

M17EB

BE CAREFUL WITH

YOUR HANDS AND

FINGERS WHEN

CLOSING THE COVER.

Your hands or fingers may be

caught in the cover and injured.

M19E

TURN OFF THE

SWITCH OF THE DUST

COLLECTOR BE-

FORE OPENING OR

CLOSING THE DUST

COLLECTOR DOOR.

Your hands or fingers may be

caught in the door and injured if

the door is drawn in and closed.

M20E

DO NOT BLOCK OFF

THE OUTLET OR IN-

LET OF THE FAN.

The temperature inside of the

machine will rise and the

machine may malfunction.

Do not block off the outlet or

inlet of the fan.

Periodically clean the filters

of the outlet and inlet.

M23E

ONLY THE PERSON IN

CHARGE MUST

CHANGE THE DATA.

The machine may runaway or

malfunction.

The data must be changed

only by a trained specialist

in charge.

M25E

BE CAREFUL OF THE

WEIGHT OF THE

FEEDER.

A large feeder is so heavy that

it may be damaged or injure

you if it is dropped.

M24EB

TAKE AWAY TOOLS

FROM THE INSIDE OF

THE MACHINE.

The machine may malfunction

as a result of a tool left inside.

Before operating the ma-

chine, verify that no tools are

left inside.

M18E

DO NOT CLIMB OR

RIDE ON THE MA-

CHINE.

You may fall from or get caught

in the machine and get injured.

Page 23

SAFETY PRECAUTIONS

Be sure to observe

3Y3C-E-MMD00-A03-02

CAUTION

M27E

DO NOT GIVE A

SHOCK TO THE ELEC-

TRICAL EQUIPMENTS.

There is a risk of an electric

shock, leak or malfunction of

the machine.

USE A JIG TO FIT AND

REMOVE THE

SPRINGS.

Your hands or fingers may be

injured.

M30EB

BE CAREFUL OF THE

CUTTER, HEAD AND

THEIR VICINITY DUR-

ING ADJUSTMENT.

Your head, hands or fingers

may be injured.

M31E

STOP THE CAMSHAFT

AT A STABLE POSI-

TION WHEN REPLAC-

ING THE TAPE CUT-

TER BLADE.

The machine may be actuated

unexpectedly and injure you.

Replace the blade according

to the instructions in MAIN-

TENANCE MANUAL.

M38EB

WEAR A PROTECTIVE

HAT AND GOGGLES

FOR MAINTENANCE

WORK.

Your head or eyes may be

injured while performing main-

tenance work.

M44E

M39E

CARRY OUT PERIODIC MAINTE-

NANCE AND INSPECTION.

If you fail to carry out periodic inspection and

maintenance, the machine cannot exhibit its true

performance. Also, it may break down or produce

defectives.

Periodic inspection and maintenance should be

carried out by a trained person in charge of

maintenance according to the instructions in

MAINTENANCE MANUAL.

BEFORE PERFORMING AUTOMATIC

WIDTH ADJUSTMENT, BE SURE TO

VERIFY NO BOARDS OR OTHER

OBJECTS ARE ON THE CONVEYOR.

Boards or other objects may drop from the con-

veyor, causing damage to the boards or the ma-

chine.

If there are any boards or other objects on the

conveyor, turn OFF the servo switch and remove

them.

M36E

DO NOT DISAS-

SEMBLE THE CAM-

ERA UNIT.

You may be injured or the

machine may break down.

If a breakdown occurs,

consult the manufacturer.

M42E