CM88Maintenace1.pdf - 第21页
Page 21 SAFETY PRECAUTIONS Be sure to observe 3Y3C-E-MMD00-A03-02 WARNING FIRML Y INSERT THE POWER AND OTHER PLUGS. Imperfect plugging in may cause fire because of electric shock and generated heat. Do not use the damage…
Page 20
SAFETY PRECAUTIONS
Be sure to observe
WARNING
3Y3C-E-MMD00-A03-01
M08E
ONLY THE PERSON IN CHARGE OF
MAINTENANCE MUST REPAIR OR
ADJUST THE MACHINE.
The machine may be incorrectly repaired or ad-
justed, resulting in malfunction.
Have the machine repaired or adjusted by a
trained professional maintenance engineer.
Consult the manufacturer for training.
DO NOT PLACE YOUR HANDS OR
BODY INSIDE ACTIVE PART OF THE
MACHINE WHEN IT IS IN A SINGLE
STOP OR CYCLE STOP CONDITION.
The machine has been stopped only temporarily.
You may be injured if the sensors are actuated and
the machine moves unexpectedly.
Turn OFF the servo switch before placing your
hands or body inside the active part.
M34EB
M95E
DO NOT DISAS-
SEMBLE THE HEIGHT
SENSOR UNIT.
If you disassemble the unit,
safety can not be ensured. You
may be injured or machine may
break down.
If a breakdown occurs,
consult the manufacturer.
L32E
WATCH YOUR HANDS.
Caught hands between board
holder and this cover will have
serious injury.
Page 21
SAFETY PRECAUTIONS
Be sure to observe
3Y3C-E-MMD00-A03-02
WARNING
FIRMLY INSERT THE
POWER AND OTHER
PLUGS.
Imperfect plugging in may
cause fire because of electric
shock and generated heat.
Do not use the damaged plug
or loose outlet.
M87E
M88EB
DO NOT INSERT OR
REMOVE POWER AND
OTHER PLUGS BY
WET HAND.
If plugged in or unplugged by
wet hand, it may result in
electric shock.
USE THE SPECIAL-
IZED OUTLET AND
BREAKER EXCLU-
SIVELY.
If the breaker is shared be-
tween machines, it may cause
fire because of generated heat.
Check the dissipation power
in your Standard Specifica-
tion before consulting an
electrical contractor.
M89EB
M06E
GROUND THE MA-
CHINE PROPERLY.
There is a risk of an electric
shock or leak.
Consult a professional
electrical contractor.
PERIODICALLY REMOVE DUST
FROM POWER PLUG.
Dust on the plug may result in fire caused by
defective insulation because of moisture.
Pull out the power plug and wipe off dirt with dry
cloth.
If the machine is not going to be used for a long
period, turn off the breaker connected with the
machine.
M86E
DO NOT DAMAGE POWER AND
OTHER CORDS OR PLUGS.
Damaged cord and plug may cause electric shock,
short circuit or fire.
Hold the plug when plugging in or unplugging.
Cord and plug repairs should be attempted only
by the person competent to do the electrical
work, or contact the manufacturer.
M85E
Never damage, remake, bring
close to heating appliances, bend
forcibly, twist, pull, put heavy
objects on, and bundle up.
Page 22
SAFETY PRECAUTIONS
Be sure to observe
CAUTION
3Y3C-E-MMD00-A03-02
M15E
DO NOT PLACE ANY
OBJECT AROUND
EMERGENCY STOP
BUTTONS.
You will be unable to press a
button to stop the machine in
case of emergency.
DO NOT PLACE ANY
OBJECTS ON THE
COVER.
The cover may break due to the
weight of the objects and injure
you.
M16EB
M17EB
BE CAREFUL WITH
YOUR HANDS AND
FINGERS WHEN
CLOSING THE COVER.
Your hands or fingers may be
caught in the cover and injured.
M19E
TURN OFF THE
SWITCH OF THE DUST
COLLECTOR BE-
FORE OPENING OR
CLOSING THE DUST
COLLECTOR DOOR.
Your hands or fingers may be
caught in the door and injured if
the door is drawn in and closed.
M20E
DO NOT BLOCK OFF
THE OUTLET OR IN-
LET OF THE FAN.
The temperature inside of the
machine will rise and the
machine may malfunction.
Do not block off the outlet or
inlet of the fan.
Periodically clean the filters
of the outlet and inlet.
M23E
ONLY THE PERSON IN
CHARGE MUST
CHANGE THE DATA.
The machine may runaway or
malfunction.
The data must be changed
only by a trained specialist
in charge.
M25E
BE CAREFUL OF THE
WEIGHT OF THE
FEEDER.
A large feeder is so heavy that
it may be damaged or injure
you if it is dropped.
M24EB
TAKE AWAY TOOLS
FROM THE INSIDE OF
THE MACHINE.
The machine may malfunction
as a result of a tool left inside.
Before operating the ma-
chine, verify that no tools are
left inside.
M18E
DO NOT CLIMB OR
RIDE ON THE MA-
CHINE.
You may fall from or get caught
in the machine and get injured.