CM88Maintenace1.pdf - 第35页
Page 35 HOW T O SEE DESCRIPTION FOR OPERA TION The description depends on each page, but basic structure is as follows. 1-1-1 Starting Production 1. Press Production . •“ Return to origin ” for all axes are carried out. …
Page 34
3Y3C-E-MMD00-A04-01
PRECAUTIONS FOR USE
How to stop the vacuum pump motor
NOTICE
Vacuum pump motor don’t stop by emergency switch and cover switch.
Only stop by main switch.
4W3C-AD00
Vacuum pump
ABOUT DISPOSAL OF COMPONENTS CONTAINING MERCURY
NOTICE
This product has a fluorescent lamp that contains a small amount of mercury.
It also contains lead in some components. Disposal of these materials may be
regulated in your community due to environmental considerations.
For disposal or recycling information please contact your local authorities, or the
Electronics Industries Alliance.
Page 35
HOW TO SEE DESCRIPTION FOR OPERATION
The description depends on each page, but basic structure is as follows.
1-1-1 Starting Production
1. Press
Production
.
•“Return to origin” for all axes are carried out.
MARKS USED IN THIS MANUAL
In this manual, the following marks are used for description.
3Y3C-E-MMD00-A04-01
Title
Title
Actual operation
Actual operation
Supplementary description on operation
Supplementary description on operation
Operating procedure number
Operating procedure number
: These show operation flow.
: These show operation (cause) and
effect.
: This shows referential item.
: This shows engineer’s operation.
: This shows pressing a key on
touch panel.
: This means pressing
UNLOCK
and then
START
on operating panel within 2
seconds.
: This means pressing B key while
holding A key.
UNLOCK
START
A B
+
Engineer
Run
Page 36
3Y3C-E-MMD00-A04-01
HOW TO SEE DESCRIPTION FOR OPERATION
NOTICE
This manual is created for CM88S-M, CM88S-M1, CM88C-D, and CM88S-MU in
common. Then the screen of illustration of CM88S-M is mainly used in this.
CM88S-M
• The board is available up to the size M.
(“Specifications for Corresponding Board” in
OPERATING MANUAL For Engineers.)
• The maximum of 70 feeders (sum of them is
140) can be set to each stage.
CM88S-M1
• The board is available up to the size M.
(“Specifications for Corresponding Board” in
OPERATING MANUAL For Engineers.)
• The maximum of 35 feeders (sum of them is
70) can be set to each stage.
4G3C-AA01
3Y3C-AG01
3Y3C-153E
B stage
A stage
3Y3C-152E
B stage A stage
303C-AA00
303C-AB01