CM88Maintenace1.pdf - 第96页
Page 1-58 1-5-1 1 Oil Cooling Box : Cleaning the Filter The oil cooling box is the unit that cools the lubricating oil of the indexing device. Remove the dust in the filter that is inhaled from the air . Clean the filter…
Page 1-57
REGULAR
MAINTENANCE
1
Check Every 560 Hours (Once a Month)
4. Close the rear center safety cover.
5. Turn on the power.
∗ Continue the operation to “Nozzle exchange
teach.”
2. Nozzle exchange teach
Carry out “Nozzle exchange teach.”
“Nozzle exchange teach” in “Machine mainte” includes “Height sensor angle origin teaching,” and it
is automatically carried out. ( 1-4-1 Cleaning and Changing the Nozzles)
3. Data check
Check the data of “Machine parameter.” ( 1-4-1 Cleaning and Changing the Nozzles)
3Y3C-AG01
R
E
L
E
A
S
E
T
R
I
P
O
F
F
O
N
R
E
S
E
T
3Y3C-E-MMD01-A05-01
3Y3C-EEn-DmDc-003
Page 1-58
1-5-11 Oil Cooling Box : Cleaning the Filter
The oil cooling box is the unit that cools the lubricating oil of the indexing device.
Remove the dust in the filter that is inhaled from the air. Clean the filter to maintain the cooling
performance.
1. Raise the filter, and pull it.
2. Remove the filter.
3. Clean the filter with a vacuum-cleaner.
Check Every 560 Hours (Once a Month)
3Y3C-E-MMD01-A05-00
3Y3C-133P
1
2
Filter
Page 1-59
REGULAR
MAINTENANCE
1
1-6 Check Every 1000 Hours (Once Two Months)
1-6-1 Transfer Head : Cleaning and Changing
This section describes cleaning and changing the transfer heads.
Operating procedure
1.Removing transfer head
2.Cleaning and checking transfer head (change)
3.Setting transfer head
4.Teaching head exchange
5.Checking machine parameter after teaching
NOTICE
Do not contaminate transfer head or reflector of nozzle with alcohol or lubricating
oil. It worsens the reflector early.
1. Removing the transfer head
Remove the nozzle and then the transfer head.
∗ Before starting operation, carry out “Return to
origin” on the “Machine adjustment menu”
screen. If they have already been done, this is
unnecessary.
1. Press
Machine
parameter
.
• The “Machine parameter menu” screen ap-
pears.
To the next page
3Y3C-E-MMD01-A06-03
Removing nozzle
Removing transfer head
Setting transfer head
Setting nozzle
Checking nozzle settings