CM88Maintenace1.pdf - 第94页

Page 1-56 Check Every 560 Hours (Once a Month) 1-5-10 Cleaning the Height Sensor This unit is for automatically measuring the detection of nozzle height and chip thickness. This maintenance is carried out at the rear sid…

100%1 / 166
Page 1-55
REGULAR
MAINTENANCE
1
Check Every 560 Hours (Once a Month)
4. Close the rear center safety cover.
5. Turn on the servo switch.
6. Press
UNLOCK
and Main axis step .
• The main axis moves by steps.
7. Turn on the servo switch.
8. Open the rear center safety cover.
9. After that, repeat the procedures 1. to
8. of “Setting the Filter,” and set the
filter to each transfer head.
OFF ( )
ON ( )
SERVO
3Y3C-AG01
OFF ( )
ON ( )
SERVO
3Y3C-AI01
Rear side
Main axis
3Y3C-125E
3Y3C-E-MMD01-A05-01
Page 1-56
Check Every 560 Hours (Once a Month)
1-5-10 Cleaning the Height Sensor
This unit is for automatically measuring the detection of nozzle height and chip thickness.
This maintenance is carried out at the rear side.
Operating procedure
1. Cleaning glass face of LED light emitting and receiving parts
2. Nozzle exchange teach
3. Data check
1. Cleaning glass face of LED light emitting and receiving parts
∗ Before starting operation, carry out “Return to
origin” on the “Machine adjustment menu”
screen. If they have already been done, this is
unnecessary.
1. Turn off the power.
2. Open the rear center safety cover.
3. Clean the glass face of LED light
emitting and receiving parts with a
clean and soft cloth.
3Y3C-AI01
Glass face
R
E
L
E
A
S
E
T
R
I
P
O
F
F
O
N
R
E
S
E
T
3Y3C-011E
To the next page
3Y3C-E-MMD01-A05-00
Page 1-57
REGULAR
MAINTENANCE
1
Check Every 560 Hours (Once a Month)
4. Close the rear center safety cover.
5. Turn on the power.
∗ Continue the operation to “Nozzle exchange
teach.”
2. Nozzle exchange teach
Carry out “Nozzle exchange teach.”
“Nozzle exchange teach” in “Machine mainte” includes “Height sensor angle origin teaching,” and it
is automatically carried out. ( 1-4-1 Cleaning and Changing the Nozzles)
3. Data check
Check the data of “Machine parameter.” ( 1-4-1 Cleaning and Changing the Nozzles)
3Y3C-AG01
R
E
L
E
A
S
E
T
R
I
P
O
F
F
O
N
R
E
S
E
T
3Y3C-E-MMD01-A05-01
3Y3C-EEn-DmDc-003