CM88Maintenace1.pdf - 第146页
Page 1-108 Changing the Consumable Parts Every 1500 to 6000 Hours 3 . Checking after change 3-A Setting inspection jig 1 . Close the rear center safety cover . 2 . T urn on the power . ∗ Starting up the machine “OPERA TI…
Page 1-107
REGULAR
MAINTENANCE
1
Changing the Consumable Parts Every 1500 to 6000 Hours
2. Preparing inspection jig
After changing, check the proper setting.
Using “Inspection jig for feeding rod and nozzle height,” check the height from the feeder table
when the tape feeding cam follower is at the lowest position.
“Inspection jig for feeding rod and nozzle height” is optional for CM88.
The same inspection jig as it is attached to our CM85C and CM86C.
1. Adjust the inspection jig.
a. Push the jig plate to the jig.
b. Loosen the bolt of jig block.
c. Align the position of jig block to the jig plate.
d. Tighten and fix the bolt of jig block.
2. Check the height of inspection jig
with a caliper.
∗ Standard value is 93.0 mm to 93.2 mm.
3Y3C-E-MMD01-A10-02
JigJig blockJig plate
a
b
c
d
3Y3C-072P
3Y3C-073P
Page 1-108
Changing the Consumable Parts Every 1500 to 6000 Hours
3. Checking after change
3-A Setting inspection jig
1. Close the rear center safety cover.
2. Turn on the power.
∗ Starting up the machine
“OPERATING MANUAL (for operators).”
3. Press
Machine
adjust
.
• The “Machine adjustment menu” screen
appears.
4. Press
UNLOCK
and Return to origin .
• Each axis is returned to origin.
3Y3C-E-MMD01-A10-02
To the next page
R
E
L
E
A
S
E
T
R
I
P
O
F
F
O
N
R
E
S
E
T
3Y3C-AG01
Page 1-109
REGULAR
MAINTENANCE
1
Changing the Consumable Parts Every 1500 to 6000 Hours
5. Turn off the servo switch.
6. Open the rear safety cover.
7. Remove all tape feeders from the
feeder table to use for checking.
∗ Do not remove or set the tape feeder at the
pickup position.
∗ Removing and setting the tape feeder
“OPERATING MANUAL (for Operators).”
8. Close the rear safety cover.
9. Turn on the servo switch.
10. Press
UNLOCK
and Inching .
• The “Inching” screen appears.
3Y3C-E-MMD01-A10-01
To the next page
OFF ( )
ON ( )
SERVO
3Y3C-AG01
3Y3C-074P
OFF ( )
ON ( )
SERVO
3Y3C-AG01
Feeder table Tape feeder