CM88Maintenace1.pdf - 第143页

Page 1-105 REGULAR MAINTENANCE 1 Changing the Consumable Parts Every 1500 to 6000 Hours 5 . Press and Inching . • The “Inching” screen appears. 6 . Press . • is displayed. 7 . Press UNLOCK and Return to origin . • Only t…

100%1 / 166
Page 1-104
Changing the Consumable Parts Every 1500 to 6000 Hours
5. Checking action after setting
After setting the nozzle extension claw, check the proper setting.
1. Move the coupling of main axis by
hand, so that “Main” on the “Axis
information” screen gets near to “0.”
∗ Make sure that it is within 0 ± 10 pulse.
2. Close the rear center safety cover and
upper cover.
3. Turn on the servo switch.
4. Press .
• The “Machine adjustment menu” screen
reappears.
3Y3C-E-MMD01-A09-02
To the next page
OFF ( )
ON ( )
SERVO
3Y3C-104P
3Y3C-EEn-MaAi-003
3Y3C-EEn-MaAi-005
3Y3C-AG01
Page 1-105
REGULAR
MAINTENANCE
1
Changing the Consumable Parts Every 1500 to 6000 Hours
5. Press and Inching .
• The “Inching” screen appears.
6. Press .
• is displayed.
7. Press
UNLOCK
and Return to origin .
• Only the transfer head returns to origin.
8. Press Nozzle Extend .
• is displayed.
9. Press .
∗ Select the optional nozzle.
10. Press
UNLOCK
and .
∗ Main axis rotates around. Check that the
nozzles on all transfer heads selected at
procedure 9. are extended during rotation.
3Y3C-E-MMD01-A09-01
3Y3C-EEn-MaInc-001
Head
90.00 [˚ ]
Valve
OFF
Nozzle select
1005
Nozzle select
1005
1
2
1
2
Head No
UNLOCK
Page 1-106
Changing the Consumable Parts Every 1500 to 6000 Hours
1-7-6 Changing the Tape Feeding Cam Follower [3000 Hours]
This section describes changing the tape feed cam followers on the tape feeding unit.
Tape feeding unit presses down the feeding lever on the tape feeder and sends chips to the pickup
position.
Operating Procedure
1. Changing cam followers
2. Preparing inspection jig
3. Checking after change
A. Set the inspection jig.
B. Set each item to check height.
C. Check the height of cam follower.
1. Changing cam followers
1. Turn off the power.
2. Open rear center safety cover.
3. Change cam followers with a wrench
or hexagonal key.
3Y3C-E-MMD01-A10-01
Tape feeding cam follower
R
E
L
E
A
S
E
T
R
I
P
O
F
F
O
N
R
E
S
E
T
3Y3C-AI01
3Y3C-071P