CM88Maintenace1.pdf - 第14页

Page 14 SAFETY PRECAUTIONS Be sure to observe 3Y3C-E-MMD00-A03-02 DANGER L01EB W A TCH YOUR HANDS. Caught hands between right feeder and left feeder tables will have serious injury . Do not put your hands between right f…

100%1 / 166
Page 13
SAFETY PRECAUTIONS
Be sure to observe
The precautions that must be observed in order to prevent injury to the user or another
person, or damage to property, are as follows.
The degree of danger or injury resulting from incorrect use due to the failure to read an
indication is classified and described as follows.
The matters should be observed are classified and described according to the symbols
shown below.
(The followings are only some examples of the symbolic indications.)
This indication refers to a situation which is considered that
there is imminent danger of death or serious injury.
This indication refers to a situation which is considered that
there is a possibility of death or serious injury.
This indication refers to a situation which is considered that
there is a possibility of only injury or physical damage.
These symbols indicate matters to which attention must be paid.
This symbol indicates an action that must not be carried out.
DANGER
WARNING
CAUTION
This symbol indicates an action that must be carried out.
3Y3C-E-MMD00-A03-01
Page 14
SAFETY PRECAUTIONS
Be sure to observe
3Y3C-E-MMD00-A03-02
DANGER
L01EB
WATCH YOUR HANDS.
Caught hands between right
feeder and left feeder tables will
have serious injury.
Do not put your hands
between right feeder and left
feeder.
L03EB
ROTATIONAL ACTIVE
PART INSIDE.
You will have serious injury if
you open the cover and touch
the active part inside.
Do not open the cover while
the machine is running.
L06EB
DO NOT OPEN THE
COVER WHEN OPER-
ATING.
You will have serious injury if
you touch the active part inside.
Page 15
SAFETY PRECAUTIONS
Be sure to observe
3Y3C-E-MMD00-A03-02
WARNING
If you sense any danger or abnormality, press an emergency stop button to
stop the machine.
If you continue to operate the machine in a dangerous or abnormal state, a breakdown or an
accident will occur.
There are five emergency stop buttons. Pressing any one of them stops operation.
Press the nearest
one.
Remove the cause of the danger or abnormality, then re-start
operation
.
To reset the emergency
stop button, pull it.
CM88S-M/M1,CM88C-D (Description is the illustration for CM88S-M.)
M33E-2B
5 Emergency stop button
(At the rear left)
4 Emergency stop button
(At the rear center)
3
Emergency stop button
(At the rear right)
4G3C-AA01
KEY LOCK
OFF ( )
ON ( )
SERVO
E
M
E
R
G
E
N
C
Y
S
T
O
P
E
M
E
R
G
E
N
C
Y
S
T
O
P
E
M
E
R
G
E
N
C
Y
S
T
O
P
E
M
E
R
G
E
N
C
Y
S
T
O
P
E
M
E
R
G
E
N
C
Y
S
T
O
P
E
M
E
R
G
E
N
C
Y
S
T
O
P
1 Emergency stop button
(At the front right)
2 Emergency stop button
(At the front left)