CM88Maintenace1.pdf - 第147页
Page 1-109 REGULAR MAINTENANCE 1 Changing the Consumable Parts Every 1500 to 6000 Hours 5 . T urn off the servo switch. 6 . Open the rear safety cover . 7 . Remove all tape feeders from the feeder table to use for checki…
Page 1-108
Changing the Consumable Parts Every 1500 to 6000 Hours
3. Checking after change
3-A Setting inspection jig
1. Close the rear center safety cover.
2. Turn on the power.
∗ Starting up the machine
“OPERATING MANUAL (for operators).”
3. Press
Machine
adjust
.
• The “Machine adjustment menu” screen
appears.
4. Press
UNLOCK
and Return to origin .
• Each axis is returned to origin.
3Y3C-E-MMD01-A10-02
To the next page
R
E
L
E
A
S
E
T
R
I
P
O
F
F
O
N
R
E
S
E
T
3Y3C-AG01
Page 1-109
REGULAR
MAINTENANCE
1
Changing the Consumable Parts Every 1500 to 6000 Hours
5. Turn off the servo switch.
6. Open the rear safety cover.
7. Remove all tape feeders from the
feeder table to use for checking.
∗ Do not remove or set the tape feeder at the
pickup position.
∗ Removing and setting the tape feeder
“OPERATING MANUAL (for Operators).”
8. Close the rear safety cover.
9. Turn on the servo switch.
10. Press
UNLOCK
and Inching .
• The “Inching” screen appears.
3Y3C-E-MMD01-A10-01
To the next page
OFF ( )
ON ( )
SERVO
3Y3C-AG01
3Y3C-074P
OFF ( )
ON ( )
SERVO
3Y3C-AG01
Feeder table Tape feeder
Page 1-110
Changing the Consumable Parts Every 1500 to 6000 Hours
11. Press .
12. Press
UNLOCK
and .
• Stage A moves to the position where address 1
comes to the tape feeding position.
13. Press Move qty set .
• Numeral keys appear.
14. Enter “4” and press ENT .
• is displayed.
3Y3C-E-MMD01-A10-02
To the next page
Stage
1.0 [step]
Stage
4.0 [step]
1
2