CM88Maintenace1.pdf - 第51页

Page 1-13 REGULAR MAINTENANCE 1 1-2 Lubricating 1-2-1 Charging the Grease Gun 1. Unscrew the grease reservoir . 2. Pull down the piston. 3. Fill the reservoir with grease. 4. Refit the reservoir to the grease gun. 5. Rel…

100%1 / 166
Page 1-12
Outline of Maintenance
= Check = Clean = Applying or pouring grease or (change) oil = Exchange
14. Tape feeder
20. Mounting section
15. Nozzle changer
16. Height sensor
17. Feeder drive axis
19. Main body
18. Feeder table
3) Spring
2) Rod end
1) Linear bearing
1) Feeder table and surroundings
1) Pressure gauge
2) Blower
4) Vacuum pump
3) Spring
01DTC2AA
07JGC2AA
11DGC2AA01DQC1AA
AJ01
3Y3C-011E
010MC0AA
2) Rod end
1) Linear bearing
3) Tape feeding cam
follower
1) Lever fulcrum
1) Glass face
3) Tape discharging hose
21. Front and rear conveyor
2) Screw shaft
5) Board transfer roller
AF01
00DHC2AB
3Y3C-E-MMD01-A01-02
2) Rod end
1) Lever fulcrum
5) Board transfer roller
1) Linear bearing
4) Board transfer belt
Ch
Cl
Gr
Ex
Gr
Gr
Ex
Gr
Gr
GrCl
Ex
Cl
Ch
Gr
Gr
Ch
Cl
Cl
Ch
Ex
Ex
Gr
Gr
Gr
Gr
Gr
Ex
Ex
Ex
2) Ball screw
4) Nozzle extension
claw
Cl
5) Oil cooling box : Filter
(only for CM88S)
Page 1-13
REGULAR
MAINTENANCE
1
1-2 Lubricating
1-2-1 Charging the Grease Gun
1.
Unscrew the grease reservoir.
2. Pull down the piston.
3. Fill the reservoir with grease.
4. Refit the reservoir to the grease gun.
5. Release the piston stopper.
• Piston stopper is always working.
∗ The spring pushes the piston, and grease is
supplied to the top of the grease gun.
Grease reservoir
Piston (pull down)
Be careful not to
enter any air.
Tight fully.
Piston stopper
(Push upward once.)
3Y3C-E-MMD01-A02-00
Page 1-14
Lubricating
1-2-2 Using the Grease Gun
1.
Select appropriate nozzle.
2. Fit the nozzle to the grease gun.
3. Attach the nozzle tip to the grease
nipple and pull the lever a few times.
4. Clean any surplus grease on the
grease nipple and surrounding of it
with a cloth.
Nozzle is not fully pushed.
Nozzle is properly attached to the nipple.
X-axis nozzle
Y-axis nozzle
Screw in completely.
Push firmly to the nozzle.
Pull
3Y3C-E-MMD01-A02-00
Grease nipple
Nozzle tip
NG
OK