KE-750_MS.pdf - 第121页
Chapter 15 Hard Disk Drive (HDD) 1. HDD Replacement (1) Remove flat cable connector CN1 in Mother 2 board. (2) Remove 4 sheet metal screws (1) holding hard disk. (3) Remove 4 screws (2). (4) Remove HDD. (Note: Be careful…
Chapter 14 Floppy Disk Drive (FDD)
1. Floppy Disk Drive Replacement
(1) Adjust jumper switch settings on new floppy disk drive to match those shown below.
(2) Remove FDD bracket.
(3) Remove the 2 connectors, remove and replace floppy disk drive.
(4) Reassemble in reverse sequence.
Jumper switch
E9433725000
FDD relay cable
E9606715000
3.5" Floppy disk
Insert jumpers at locations circled
Jumper Switch Setting Diagram
SM0061201SC
SL4030691SC
FDD
support
FDD
Floppy disk drive
Fig. 14-1-1
Fig. 14-1-2
Fig. 14-1-3
1-113
Chapter 15 Hard Disk Drive (HDD)
1. HDD Replacement
(1) Remove flat cable connector CN1 in Mother 2 board.
(2) Remove 4 sheet metal screws (1) holding hard disk.
(3) Remove 4 screws (2).
(4) Remove HDD. (Note: Be careful not to let rubber bushes or spacers create debris.)
(5) Reassemble in reverse sequence.
(Bottom)
View o
f
back face o
f
panel computer
Mounting
plate
(Top)
Mother 2 board
Screw (1) x 4
Note: Scre
w
s, round column
spacers and rubber bushes are
accessories to panel computer.
Screw x 4
Spacer x 4
Rubber bush x 4
Panel computer (Top)
Mounting plate
HDD (Hard disk drive)
Panel computer (Bottom)
Fig. 15-1-1
Fig. 15-1-2
1-114
Chapter 16 Panel Computer
1. Panel Computer Replacement
(1) Remove the following:
94377250A0 Printer cable
95807250A0 Track ball cable
92367250A0 Power cable
(2) Remove the 6 flange nuts.
(3) Remove the 4 plate screws to remove PC bracket. Remove panel computer at the same time.
(4) Reassemble in reverse sequence.
E1340725000
PC bracket
SM1030601SN
Plate screw x 4
E9601725000
Panel computer
Flush nut x 6
NM3040520SF
E1345725000
LCD sheet
E5776172000
Top cover packing PU
E5776172000
Panel computer
B412280400
0
FIG. 16-1-1
Fig. 16-1-2
1-115