KE-750_MS.pdf - 第52页

7. HMS Replacement (Optional) HMS is adjusted with the sensor and amp. Sensor and amp are always replaced simultaneously (It is not possible to change only one.) 7.1 HMS sensor replacement Laser senso r SEMS cap screw x …

6-3 Sensor Height Adjustment (Only when sensor replaced)

Refer to QA Table, Bad Mark Sensor, Sensor height.

After adjustment, enter MS parameters.

For entry refer to MS parameter operation specifications 4 - 12 - 2 Bad mark sensor offset.

1-44

7. HMS Replacement (Optional)

HMS is adjusted with the sensor and amp. Sensor and amp are always replaced simultaneously (It is not

possible to change only one.)

7.1 HMS sensor replacement

Laser senso

SEMS cap screw x 2

SL6042592TN

SEMS cap screw x 2

SL6030692TN

(SEMS cap screw x 2)

SL6030892TN

Fastened with cable tie

Model 750: HMS holder (750)

E3651725000

Model 760: HMS holder (760)

E3652725000

Camera bracket D

E3809725000

Fig. 3-7-1

1-45

Affixing HMS seal

Cut along dotted line as shown in diagram.

Clean affixing surface with alcohol to remove grease and affix in position shown in diagram. (Align seal

arrow with laser projector.)

Fig. 3-7-2

Laser projecto

Fig. 3-7-3

1-46