KE-750_MS.pdf - 第156页
1-141
11-3 Hard Disk Format
11-3-1 Format Sequence
1. Setting BIOS
Sets report of peripheral equipment (HDD, FDD, etc.) to panel computer memory.
(1) Connect keyboard and FDD (floppy disk drive) to panel computer.
(2) Supply power to panel computer.
(3) On screen A "Press <F2> to Enter SETUP" will appear. Press [F2] key and hold down.
(4) Once set up utility is activated, BIOS screen will appear.
(5) Look over the overview of key controls at the bottom of the screen. Move the cursor to
check each item do setup.
1 System time: [Hr:Min:Sec] Enter time.
2 System date: [Mo/Day/Yr] Enter today's date.
3 Diskette A: 1.44MB, 31/2"
4 Diskette B: Set to Not Installed.
5 IDE Adapter 0 Master (None) Press ENTER key and screen B will display.
Autotype Fixed Disk: Press ENTER key and HDD type is automatically set.
(Ex: 541MByte)
6 Video System: Select EGA / VGA.
7 Memory Cache: Do not alter.
8 Memory shadow: Do not alter.
9 Boot Sequence: Select A: then C: (*) Note
10 Press ESCAPE key. Move cursor to EXIT at top of screen A.
11 Screen C will display.
Select "Save Changes & Exit" to store set values in CMOS.
NO System and ERROR messages that appear may be ignored. These are not set in the
MS-DOS installed disk of the FDD.
(*) Note: After format operation 17 - 11 - 3 - 2, message will revert to "C: then A: ".
1-140
1-141
11-3-2 Format
(1) Insert MS-DOS in FDD.
(2) Simultaneously press Ctrl+Alt+Delete.
(3) After a moment screen will display message
Starting MS-DOS ....
indicating loading from FDD to system.
Next, system will ask for date and time. Press RETURN key 2 times.
A:> prompt will appear.
(4) Enter FDISK and press RETURN key.
Screen will display hard disk setup program.
Current hard disk : 1
Select one of the following
1. Create MS-DOS domain or logic MS-DOS drive.
2. Set active domain.
3. Cancel domain or logic MS-DOS drive.
4. Display domain report.
Select one: [1]
For this screen enter "1" and press RETURN.
(5) "Create MS-DOS domain or logic MS-DOS drive" menu will appear on the screen.
Current hard disk : 1
Select one of the following.
1. Create PWB MS-DOS domain
2. Create enlarged MS-DOS domain
3. Create logic MS-DOS drive within enlarged MS-DOS domain
Select one: [1]
For this screen enter "1" and press RETURN.
1-142