KE-750_MS.pdf - 第182页
4.2 Head Types Select "1/Initial set-up" then "2/Kind of Head" and the head type setting dialog will appear as follows. (1) Setting Headings No. Item Contents 1 Kind of Head Laser sensor types by head…
While watching OCC monitor, adjust position of No. 1 mark on the CAL block to near center of the
field of vision.
When adjustment cannot be completed with the CAL block, move XY origin sensor and adjust.
Setting is completed.
If CAL block or XY origin sensor positioning have been adjusted, select OK to repeat operation.
Verify position of No. 1 mark.
2-14
4.2 Head Types
Select "1/Initial set-up" then "2/Kind of Head" and the head type setting dialog will appear as follows.
(1) Setting Headings
No. Item Contents
1 Kind of Head Laser sensor types by head
(2) Method of Setting
– Select items in (1) with the tuner button.
– When head type is changed, return laser and Z/ -axis MS parameters and mechanism control
parameters to default. Parameters must then be reloaded.
Parameter Default Settings
MS Parameters Servo Gain
Laser Offset (Board surface height, laser height)
Laser Scaling (Scaling, Rotation center of nozzle)
Head Offset (Assembling position, laser assembling angle)
Mechanism
Control
Parameters
Z Axis Max. speed, Acceleration, Dumping wait time
Incremental data increase in Z axis for 1 pulse
Mid / high speed ratio (%)
Low / high speed ratio (%)
Permissible Y coordinates for Z descent
θ Axis Max. speed, Acceleration, Dumping wait time
Incremental data increase in θ axis for 1 pulse
Laser Preload angle
Calculated wait time
Hold off count
Algorithm replacement threshold value (11, 11 & 11, -11)
After modifying settings and selecting "Exit", message box will appear requesting return to default or
reloading.
When "OK" is selected, all modified parameters in the head types selected will return to default.
2-15
When exiting PS parameters answer "Yes" to "Save Set Parameters?" and modifications to head
types will be validated.
When "Save Set Values?" is answered "Yes", message box requesting reloading appears. If power
failure occurs, reload values.
MS parameters set at default must be reset.
Selecting "Cancel" returns to setting dialog.
2-16