Forte Max Manual.pdf - 第56页
ForteMAXDispensingSystemAddendum Recipe Creation 52 © 2023 Nordson Corpo ration 4.6 Running Producti o n 1. Prior to running the recipe, install the dispensing fluid and perform a wet valve offsets procedure. Refer t…
ForteMAXDispensingSystemAddendum Recipe Creation
© 2023 Nordson Corporation 51
15. When finished, there will be four (4) "Do Rectangle" instructions in the Recipe Tree
(Figure 4-53).
> All four (4) containers have been placed (Figure 4-54).
> Figure 4-54 shows Applicator 1 in red dispensed squares and Applicator 2 in black
dispensed dots.
Figure 4-53 Do Rectangle Instructions
Figure 4-54 Containers Placed
ForteMAXDispensingSystemAddendum Recipe Creation
52 © 2023 Nordson Corporation
4.6 Running Production
1. Prior to running the recipe, install the dispensing fluid and perform a wet valve offsets
procedure. Refer to the Canvas Dispensing Software User Guide if necessary.
> Wet Valve Offset procedures are shown in Figure 4-55.
1
2
3
4
6
7
5
Wet Offsets
9
10
11
12
13
8
9
14
15
Dry Offsets
Wet Offsets
Figure 4-55 Setup Procedures
2. Select the Production button on the Navigation Panel to open the Production Home
screen (Figure 4-56).
3. Make sure you are in Production Mode. The Production Mode icon should appear at the
left of the screen. If the system is in Setup Mode , click the mode icon to change to
Production Mode.
4. Verify that Wet mode is selected.
Figure 4-56 Production Home Screen
5. Select Run to run the recipe.
> You can monitor the production run through the data monitors. If a monitor button is
red, attention is required.
> Some monitor tiles, such as heaters, have an ON/OFF indicator.
© 2023 Nordson Corporation 53
5 Maintenance
5.1 Overview
Following a routine maintenance schedule and procedures can prevent part degradation and ensure high
quality performance for every production run.
?
NOTE
This section applies to the Forte Max Dispensing System only. Refer to the Forte
Dispensing System Installation, Operations, and Maintenance Manual for complete
system maintenance instructions.
This section covers the following topics:
• Lubricating the Forte MAX Bracket
5.2 Safety First
Operation of the dispensing system involves heat, air pressure, electrical power, mechanical devices, and
the use of hazardous materials. It is essential that every person servicing or operating the dispensing
system fully understands all hazards, risks, and safety precautions. Refer to Section 2 – Safety in this
manual and to the Forte Dispensing System Installation, Operations, and Maintenance Manual for
important safety information.