Tracker-2800-2800S.pdf - 第10页
10 Qualit y Huntron has been producing qualit y products and supporting customers all over the world for several decades. Our products conform to our Qualit y Manual. For information see our Quality Statement at www.hunt…
9
Do Not Operate in Wet/Damp Conditions.
Ne pas opérer dans les conditions humides ou humides.
Do Not Operate in an Explosive Atmosphere.
Ne pas opérer dans une atmosphère explosive.
1-4 Environment Conformity Quality
For more information see our website www.huntron.com/corporate/environment.htm
Environment
Huntron is aware of the recycling needs for Waste Electronic and Electrical
Equipment (WEEE) and is co-operating with systems established, worldwide for
the collecting and recycling of our products.
Huntron has applied the wheeled bin recycle mark (EN50419) to our products.
Recycling is important to all communities; therefore, we ask our customers to be
responsible in recycling. Please check your local recycling laws for further
information.
Huntron wants to make sure that old Huntron products are responsibly recycled.
As part of that goal, Huntron offers a trade-in for any one used Tracker or Prober
when a new Tracker or Prober is purchased. All trade-in products are responsibly recycled. More
information on Trade-in program go to www.huntron.com/sales-support/repairpolicy.htm.
Conformity
Huntron products are classified as Category 9 industrial monitoring and control instruments. Our
manufacturing processes conform to our standards. These include regulation and directives like
RoHS2, REACH and Conflict Minerals. See our Declaration of Conformity to Huntron Quality
Standard at www.huntron.com/corporate/docs/conformity.pdf.
10
Quality
Huntron has been producing quality products and supporting customers all over the world for several
decades. Our products conform to our Quality Manual. For information see our Quality Statement at
www.huntron.com/corporate/docs/quality-statement.pdf.
1-5 Optional Workstations Software
The Tracker 2800/2800S can be used with Huntron Workstation Software.
Note: For instructions on installing the software, see the Getting Started document that comes with the
Huntron Tracker 2800/2800S or Huntron Workstation Software.
11
Section 2 Using the Tracker 2800/2800S
2-1 Unpacking and what you need to get started
To set up and use your Tracker 2800 or 2800S, you will need the following:
One set of Microprobes (Huntron MP20).
This manual (Tracker 2800/2800S User’s manual)
For Tracker 2800S, cables to connect to a PCB connector or DIP clip cables and clips (These
are not included)
Common test lead
Blue test lead for use with DC Voltage source
Using the unpacking list, verify that all that all pieces are included in the shipping container. Contact
Huntron immediately if pieces are missing.