Tracker-2800-2800S.pdf - 第8页
8 EN/IEC 55 011 EN 610 00-3-2 EN 610 00-3-3 EN/IEC 61 000 -4-2 EN/IEC 61 000 -4-3 EN/IEC 61 000 -4-4 EN/IEC 61 000 -4-5 EN/IEC 61 000 -4-6 EN/IEC 61 000 -4-8 EN/IEC 61 000 -4-11 IEC 610 10-1:2010 (T hird Edition) UL 6101…
7
(
-
50 degrees C to +60 degrees C)
Humidity
0 to 50%
R.H.
Dimensions
11.1" W x 4.4" H x 8.5” D (28.2cm W x 11.2cm H x
22.1cm D
)
Warranty
1 year limited
Supplied Accessories
Huntron P/N QTY Description
06-5217 1 User's Manual CD
98-0043 2 Test Lead Black
98-0249 1 pair Huntron Microprobes MP20
98-0265 1 Power cord
98-0284 1 Shrouded blue test lead
1-3 Safety Information (Information sur la sécurité )
Symbols and Warnings: (Symboles et avertissements):
The following symbols are used either in this manual or on the unit:
Les symboles suivants sont utilisés soit dans ce manuel ou sur l'appareil:
Protective Ground (Earth) Terminal. Do not disconnect any protective ground
wires.
Rez de protection (terre). Ne débranchez pas de câbles de garde protectie.
CAUTION This symbol is used in the user’s manual as a warning that improper use could
result in unit malfunctioning. For your safety always follow the instructions next to the
symbol on the unit and in the manual.
ATTENTION Ce symbole est utilisé dans le manuel de l'utilisateur comme un avertissement que
l'usage abusif peut entraîner des dysfonctionnements unité. Pour votre sécurité toujours suivre les
instructions à côté du symbole de l'unité et dans le manuel.
The Huntron Tracker 2800 conforms to the following Standards:
8
EN/IEC 55011
EN 61000-3-2
EN 61000-3-3
EN/IEC 61000-4-2
EN/IEC 61000-4-3
EN/IEC 61000-4-4
EN/IEC 61000-4-5
EN/IEC 61000-4-6
EN/IEC 61000-4-8
EN/IEC 61000-4-11
IEC 61010-1:2010 (Third Edition)
UL 61010-1 Issued: 2012/05/11 Ed:3
CSA C22.2 No. 61010-1 Issued:2012/05/11 Ed:3
EN 61326-1: 2013
IEC 61326-1: 2012
Meets the Standard for Safety Requirements for Electrical Equipment for Measurement,
Control and Laboratory Use; Part 1 General Requirements – UL 61010-1, 2
nd
Ed., with revisions
through 07/22/2005, and CAN/CSA-C22.2 No. 61010-1, 2
nd
Ed., dated 07/12/2004.
Line Fuse Replacement: (Line Remplacement des fusibles):
Line Fuse tray: The power entry module includes a power cord connector, and a removable tray
which holds the line fuses.
Ligne bac Fuse: Le module d'entrée comprend un connecteur d'alimentation cordon d'alimentation, et
un plateau amovible qui contient les fusibles en ligne.
Make sure that replacement fuses are of the type and current rating specified. If necessary, insert a
T400mA 5x20mm 250V fuse into the fuse tray.
Assurez-vous que les fusibles de remplacement sont de type et leur courant nominal spécifié. Si
nécessaire, ajouter un 5x20mm T400mA 250V dans le bac à fusibles.
Do Not Operate Without Covers. Do not operate this instrument with covers or panels removed.
Ne pas fonctionner sans Covers. Ne pas utiliser cet instrument avec ou panneaux enlevés.
Avoid Exposed Circuitry. Do not touch exposed connections and components when power is present.
Évitez les circuits à découvert. Ne touchez pas les exposés et les composants lorsque la puissance
est présente.
Do Not Operate With Suspected Failures. If you suspect there is damage to this instrument, have it
inspected by qualified service personnel.
Ne pas utiliser Avec les échecs présumés. Si vous pensez que il ya des dommages à cet instrument, le
faire inspecter par un technicien qualifié.
9
Do Not Operate in Wet/Damp Conditions.
Ne pas opérer dans les conditions humides ou humides.
Do Not Operate in an Explosive Atmosphere.
Ne pas opérer dans une atmosphère explosive.
1-4 Environment Conformity Quality
For more information see our website www.huntron.com/corporate/environment.htm
Environment
Huntron is aware of the recycling needs for Waste Electronic and Electrical
Equipment (WEEE) and is co-operating with systems established, worldwide for
the collecting and recycling of our products.
Huntron has applied the wheeled bin recycle mark (EN50419) to our products.
Recycling is important to all communities; therefore, we ask our customers to be
responsible in recycling. Please check your local recycling laws for further
information.
Huntron wants to make sure that old Huntron products are responsibly recycled.
As part of that goal, Huntron offers a trade-in for any one used Tracker or Prober
when a new Tracker or Prober is purchased. All trade-in products are responsibly recycled. More
information on Trade-in program go to www.huntron.com/sales-support/repairpolicy.htm.
Conformity
Huntron products are classified as Category 9 industrial monitoring and control instruments. Our
manufacturing processes conform to our standards. These include regulation and directives like
RoHS2, REACH and Conflict Minerals. See our Declaration of Conformity to Huntron Quality
Standard at www.huntron.com/corporate/docs/conformity.pdf.