4022-593-51431_Feeder Repair_CHS.pdf.pdf - 第29页
4022 593 51431 Option Manual 07.01 Feeder Service Shop 3-1 Spare P arts ITF & TTF Feeders CHAPTER 3 Spare P arts ITF & TTF Feeders 3.1 Mod ule Overview Spar e P arts ITF The spar e parts detail ed in CHAPTER 3.3 …
4022 593 51431 Option Manual
07.01 Feeder Service Shop 3-1
Spare Parts ITF & TTF Feeders
CHAPTER 3 Spare Parts ITF & TTF Feeders
3.1 Module Overview Spare Parts ITF
The spare parts detailed in CHAPTER 3.3 are divided into the following modules:
Module 1: Control Unit
Module 2-22: Reel Holder Assembly
Module 3-15: Topfoil Peel-off Assembly
Module 4: Clamping Lever Assembly
Module 5: Sprocket Wheel Drive Assembly
Module 6: Mounting Plate Assembly
3.2 Repair
Local Repair:
For approximately 90% of the parts it is possible to repair the feeder locally without
the need of special equipment. However, not all parts are mentioned in the
following pages. The parts mentioned here are the parts likely to get damaged or
lost during production or repair actions.
Central Repair:
a) Assembléon offers central repair if local repair is not possible.
b) Central repair comes with the following conditions:
• Feeder must be packed properly. Damage caused by transport will not be
repaired
• Feeders must be complete. No parts should be missing.
Customized Repair:
With customized repair, the feeder will be returned to the originator with the
shortest possible repair time. The feeder will be functionally repaired and all
customer improvements, identifications will remain untouched (unless it is noticed
that this has negative influence on the feeder performance). Customized repair is
cheaper than Swap Repair.
Swap Repair:
This is refurbished repair. Within the delivery agreements of the regions, a defective
feeder is replaced by a refurbished feeder. All customized improvements, identifi-
cations are removed from these feeders. The feeders represent a correct functioning
feeder of the same level as the corresponding PA#. The contents of these feeders is
exactly as the contents of the PA#.
Feeders returned for Customized and Swap repair can be returned via regular
channels.
