00197004-04_UM_X-Serie-S_EN.pdf - 第16页
Contents User manual SIPLACE X-Series From software version 706.1 SP1 Edition 04/2014 16
User manual SIPLACE X-Series Contents
From software version 706.1 SP1 Edition 04/2014
15
6.10.3 Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 397
6.11 Component camera for the TwinStar, FC camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 398
6.11.1 Stationary P&P component camera (type 25) 16 x 16, digital (FC camera). . . . . 398
6.11.2 Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 398
6.11.3 Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 399
6.11.4 Position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 399
6.12 Component camera for the MultiStar. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400
6.12.1 Component camera, stationary P&P, type 33, 55 x 45, digital . . . . . . . . . . . . . . . 400
6.12.1.1 Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 401
6.12.1.2 Position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 401
6.13 Siemens interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 401
6.14 Support pin. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 402
6.15 Smart Pin Support. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 403
6.16 Long board option (LBO) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 406
6.17 Vision Teach Station . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 407
6.17.1 Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 408
6.17.2 Benefits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 408
Contents User manual SIPLACE X-Series
From software version 706.1 SP1 Edition 04/2014
16
User manual SIPLACE X-Series 1 Introduction
From software version 706.1 SP1 Version 10/2014
17
1 Introduction
This user manual is a guide or reference work for operating and setting up the SIPLACE
®
X-Se-
ries S placement machines.
The X-Series S placement machines are available in six different variants.
– SIPLACE X4i S (from SC 706.1 SP1)
– SIPLACE X4 S (from SC 706.1 SP1)
– SIPLACE X4i S micron (from SC 707.0)
– SIPLACE X4 S micron (from SC 707.0)
– SIPLACE X3 S (from SC 706.1 SP1)
– SIPLACE X2 S (from SC 707.0)
The numbers in the type name indicate the number of gantries used. Each gantry has one place-
ment head.
This document is the original user manual.
1
1
The header of each chapter contains the release and software version, to which this manual ap-
plies.
PLEASE NOTE
The SIPLACE X-Series S placement machines have a largely identical design; any dif-
ferences will be explicitly indicated.
To view the available configurations and options, refer to the specifications for the
relevant SIPLACE X-Series S machines and the specifications for the SIPLACE X4
S micron / X4i S micron machines.
The diagrams in this user manual generally show the SIPLACE X4 S or X4i S machine.
These diagrams also apply to the SIPLACE X2 S / X3 S, SIPLACE X4 S micron or SI-
PLACE X4i S micron machines. In the event of deviations, a corresponding diagram will
be shown.