00197004-04_UM_X-Serie-S_EN.pdf - 第345页
User manual SIPLACE X-Series 6 Station extensions From software version 706.1 SP1 Version 10/2014 6.1 Nozzle changer 345 6 Fig. 6.1 - 12 Nozzle changer for the C&P20 P- changing the magazine (example of 6 magazines) …
6 Station extensions User manual SIPLACE X-Series
6.1 Nozzle changer From software version 706.1 SP1 Version 10/2014
344
6
WARNING
Risk of head crashes with protruding lever
Any lever that is protruding over the magazine (item 1 in fig 6.1 - 12
) can result in a head
crash.
You should therefore make sure that the lever does not protrude over the maga-
zines.
User manual SIPLACE X-Series 6 Station extensions
From software version 706.1 SP1 Version 10/2014 6.1 Nozzle changer
345
6
Fig. 6.1 - 12 Nozzle changer for the C&P20 P- changing the magazine (example of 6 magazines)
(1) Lever for raising the magazine
(2) Parallel pin, engages in the hole in the magazine
(3) spring pin for triggering the microswitch
(4) Pin of the slide mechanism, moves the locking plate
(5) Ball of snap fastener
(6) Parallel pin, engages in the slot in the magazine
(7) Locking plate in the "magazine locked" position
6
PLEASE NOTE
Move the locking plate into the "Magazine locked" position.
Before inserting, align the magazine so that the centering pins (items 2 and 6 in fig.
6.1 - 12
, page 345) slide into the centering holes and slot.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
6 Station extensions User manual SIPLACE X-Series
6.1 Nozzle changer From software version 706.1 SP1 Version 10/2014
346
Place the magazine on the snap fastener balls (item 5 in fig. 6.1 - 12, page 345).
Press the magazine down evenly so that the snap fastener balls engage in all the snap fas-
teners at the same time.
6.1.3.9 Position detection
Each magazine of the nozzle changer has two fiducials: one for determining the position and one
for determining the angular position.
6
Fig. 6.1 - 13 Nozzle magazine - holder numbering, fiducials for determining the position and angular position
(1) Locking plate in the "magazine open" position
(2) Fiducial for determining the position
(3) Fiducial for determining the angular position