00197004-04_UM_X-Serie-S_EN.pdf - 第396页
6 Station extensions User manual SIPLACE X-Series 6.10 3D coplanarity laser module From software ve rsion 706.1 SP1 Version 10/2014 396 6.10.2 Description The 3D coplanarity laser module works with a line of laser light.…
User manual SIPLACE X-Series 6 Station extensions
From software version 706.1 SP1 Version 10/2014 6.10 3D coplanarity laser module
395
6.10 3D coplanarity laser module
Item no. 519807-xx 3-D coplan, X2 S / X3 S / X4 S
6.10.1 Safety instructions for coplanarity module sensor
The sensor works with a semiconductor laser which has a wave length of 670 nm (visible/red).
The maximum optical output is 1 mW.
This sensor is classified as laser class 2.
– When using the sensor, always observe the applicable VDE 0837 regulations regarding "Ra-
diation safety of laser devices" and the"Laser radiation" (BGV B2) accident prevention regu-
lation applicable in Germany.
– Also observe the accident prevention regulations of your own country!
The following labels are attached to the front and back of the sensor:
6
Fig. 6.10 - 1 Laser class 2 classification for the sensor
Despite the low laser output, avoid looking directly at the laser beam. As the beam is visible, the
natural reflex of your eyelids will protect your eyes from the beam.
6
WARNING
The housing of the optical sensor may only be opened by authorized personnel.
For repair and service work, always send the sensors to ASM Assembly Systems
GmbH&Co.KG.
6 Station extensions User manual SIPLACE X-Series
6.10 3D coplanarity laser module From software version 706.1 SP1 Version 10/2014
396
6.10.2 Description
The 3D coplanarity laser module works with a line of laser light. This enables you to generate and
analyze the height profile of a two-dimensional arrangement of component leads e.g. BGA, QFP
etc. This analysis provides data about the coplanarity (contact plane) and collinearity (contact line
straightness) of component leads or balls.
6
Fig. 6.10 - 2 3D coplanarity laser module
User manual SIPLACE X-Series 6 Station extensions
From software version 706.1 SP1 Version 10/2014 6.10 3D coplanarity laser module
397
6.10.3 Technical data
6
Components QFP, SO, BGA, Gullwing, connector
Accuracy
*a
± 15 μm (3), ± 20 μm (4)
Maximum component size 50 x 50 mm²
Maximum component height 17 mm
BGA component shape
Min. ball diameter
Min. ball pitch
Min. number of balls
400 m
800 m
6
Gullwing component shape
Min. lead width
*b
Min. lead pitch
Min. number of leads
300 m
500 m
5
Maximum connector size 120 x 20 mm²
Connector (Gullwing)
Min. lead width
b
Min. lead pitch
Min. number of leads
300 m
500 m
5
Placement head type TwinHead
Laser protection class
3D coplanarity sensor
Placement machine
3B
2
*)a Per ball/lead
*)b Contact your local product manager for details of smaller lead widths
For more details, refer to the "Assembly Instructions 3D Sensor", German+English [Item. no.
00197084-xx]