00192662-01.pdf - 第33页

User Manual SIPLACE F5/F 5 HM 1 Introduction and technical data Software version SR.407.xx 01/2001 US Edition 1.5 Machine description 33 1.5. 2 Gener al vie w of the SI PLACE F5 with waffl epack changer 1 Fig. 1.5 - 2 Ge…

1 Introduction and technical data User Manual SIPLACE F5/F5 HM

1.5 Machine description Software version SR.407.xx 01/2001 US Edition

The F5 placement machine is a high-speed placement machine with a gantry axis system. The

gantry supports: 1

– a PCB vision module,

– a star-shaped 6-segment Collect&Place head, and

– a Pick&Place head.

The 6-segment Collect&Place head will increase the placement rate if the proportion of ICs in the

placement process is very high. 1

The Pick&Place head is particularly suitable for inserting fine-pitch components. In addition to the

vision module for PCB centering, the F5 machine also has component vision modules for the Col-

lect&Place head and Pick&Place head. 1

A coplanarity laser module and a flip-chip vision module can also be retrofitted as options. 1

A wafflepack changer can be used to supply components. 1

The placement heads pick up components from stationary feeders and then place them in the

PCBs clamped on the PCB conveyor. 1

User Manual SIPLACE F5/F5 HM 1 Introduction and technical data

Software version SR.407.xx 01/2001 US Edition 1.5 Machine description

1.5.2 General view of the SIPLACE F5 with wafflepack changer

Fig. 1.5 - 2 General view of the F

with wafflepack changer

(1) Wafflepack changer

(2) Pick&Place head

(3) 6-segment Collect&Place head

1 Introduction and technical data User Manual SIPLACE F5/F5 HM

1.5 Machine description Software version SR.407.xx 01/2001 US Edition

There is a DCA package available for the SIPLACE F

placement machine. This contains an al-

ternative vision module that can be installed on the 6-segment Collect&Place head in place of the

conventional vision module. The DCA package optimizes the placement speed and accuracy for

flip-chips and bare dies. 1

The concept behind the placement machine 1

– with its stationary feeders,

– with PCBs that do not move during placement,

– and its positionable placement heads

has number of significant benefits: 1

– For example, the flexible 6-segment Collect&Place head combined with automatic nozzle

changer enables the nozzle configuration to be changed temporarily and automatically

adapted to receive different component sizes You can also optimize the travel paths, and the

placement sequence.

– With stationary feeders, even the tiniest components are picked up reliably.

– The components cannot slip on the PCB during placement (as is often the case with moving

PCBs) since the PCB does not move.

– Sophisticated optical centering systems (vision systems) for components and PCBs also en-

sure high component positioning accuracy.

– Components can be topped up and tapes can be spliced without stopping the machine.

– Prepared component tables enable the placement machine to be retooled without long idle

times.