00192662-01.pdf - 第442页

10 Component handling User Manual SIPLACE F5/F5 HM 10.2 Technical dat a for the feeder mo dules Sof tware version SR. 407.xx 01/2001 US E dition 442 10.2.4 12/16 mm S module 10 Fig. 10.2 - 4 12/16 mm S module Item no. 00…

100%1 / 596
User Manual SIPLACE F5/F5 HM 10 Component handling
Software version SR.407.xx 01/2001 US Edition 10.2 Technical data for the feeder modules
441
10.2.3 3 x 8 mm S module for 0201/0402 components
Fig. 10.2 - 3 3x8mm S module for 0201/0402 components
Article number 00141099-xx
Width 30 mm
Component range 0201, 0402
Tracks per module 3
Maximum number of modules (DCA) 2 x 20
Stock of components for 7” reels approx. 10,000 – 15,000
Data specific to reel diameter 7” – 15”, maximum 381 mm
Transport distance (adjustable) 2mm ( 4mm)
Cycle time 60 ms
Power supply 30 V DC
LIMITED COMPONENT PICK-UP OPTIONS:
If the following combination of track, location and conveyor track is used, components cannot be
picked up from triple conveyors.
Location/Track Conveyor track
1/115 3
3/1 1 10
10 Component handling User Manual SIPLACE F5/F5 HM
10.2 Technical data for the feeder modules Software version SR.407.xx 01/2001 US Edition
442
10.2.4 12/16 mm S module
10
Fig. 10.2 - 4 12/16 mm S module
Item no. 00141092-xx
Width 30 mm
Tracks per module 1
Maximum number of modules 2 x 20
Magazine capacity for 7" reels Approx. 4000
Reel diameter 7" - 15" (up to 381 mm)
Feeding stroke (variable) 4 mm, 8 mm, 12 mm, 16 mm
Cycle time 60 ms ± 5 ms for a feeding interval of 8 mm
Main power supply 30 VDC
User Manual SIPLACE F5/F5 HM 10 Component handling
Software version SR.407.xx 01/2001 US Edition 10.2 Technical data for the feeder modules
443
10.2.5 12 mm S module for capacitors based on powdered metal, model C/D
Fig. 10.2 - 5 12 mm S module for capacitors based on powdered metal, model C/D
Item no. 00141118-xx
Width 30 mm
Tracks per module 1
Maximum number of modules 2 x 20
Magazine capacity for 7" reels Approx. 4000
Reel diameter 7" - 15" (up to 381 mm)
Maximum tape height 3,6 mm
Feeding stroke (variable) 4mm, 8mm, 12mm, 16mm
Cycle time 60 ms ± 5 ms (feeding stroke: 8 mm)
Vibrator time (waiting time) 100 ms
Main power supply 30 VDC
NOTE: 10
Using this feeder type you can adjust the height of the tape support at the pick-up position. 10
DANGER 10
Use only feeders, labeled as shown above, when fee-
ding capacitors based on metal-powder (e.g. tanta-
lum). 10
Feeder label (enlarged)
Approved for
capacitors based on
metal-powder
Freigegeben für
Kondensatoren auf
Metallpulver-Basis