DFD6361-Maintenance.pdf - 第113页

B-41 2-3-1. Rem oving the f lange ( 1.8 kW spindl e) Safety pr ecautio ns for r emoving the fla nge (1. 8 kW spindl e) W ARNING In the fla nge remov al operatio n, you hav e to touch the spindl e-axi s section and axis o…

B-40

FlangeA removing jig (1.8 kW Spindle)

It is used to remove the flangeA.

[1.8 kW Spindle: R-Type Flange]

Jig Name Part No.

Removing jig (flange) MOKBN007

B-41

2-3-1. Removing the flange (1.8 kW spindle)

Safety precautions for removing the flange (1.8 kW spindle)

WARNING

In the flange removal operation, you have to touch the spindle-axis

section and axis operating section directly by your hands. If the

spindle is not stopped, your hands or fingers may be caught or cut

off.

- Before opening the splash cover, visually make sure from outside

of the cover that the spindle is completely stopped.

- Ensure that no other person touches the machine during operation.

- While you don't use the touch panel, press the Disco's logo

button located at the upper left of the screen in order to lock up

and deactivate the touch panel.

CAUTION

In flange removal/installation, observe the following precautions to

protect the spindle from damage.

- Before starting replacement, call up and display the BLADE

REPLACEMENT screen [screen 4.1].

- Make sure that air is supplied to the spindle.

- Be sure to apply force only in the direction of cocentral of spindle

axis (Y-axis direction).

B-42

Exploded view of flange and blade (1.8 kW spindle)

The flange and blade are to be mounted as illustrated below.

[1.8 kW spindle: R-type flange]

Flange B

Flange A

Flange B lock nut

Blade

Lock bolt

Washer