DFD6361-Maintenance.pdf - 第440页
E-4 1-1. Cle aning the Non-Contact Setup Senso r (Detection Surface ) [Optional Accesso ry] Operation flow The procedure for cl eaning the non-contact setup sensor (detection surfa ce) consists of the f ollowing steps. 1…
E-3
1. Maintenance Whose Interval Differs
Depending on the Machine Use Conditions of
the Device
Summary of this section
This section describes maintenance whose service interval differs depending
on the machine usage conditions.
Section No. Title Contents
1-1 Cleaning the Non-Contact
Setup Sensor (Detection
Surface)
[Optional Accessory]
- Procedures for cleaning the non-
contact setup sensor
1-2 Cleaning the Blade
Breakage Detector Sensor
- Procedures for cleaning the
blade breakage detector sensor
1-3 Cleaning the spindle - Procedures for cleaning the
spindle
1-4 Cleaning the touch panel - Procedures for cleaning the
touch panel
E-4
1-1. Cleaning the Non-Contact Setup Sensor
(Detection Surface) [Optional Accessory]
Operation flow
The procedure for cleaning the non-contact setup sensor (detection surface)
consists of the following steps.
1-1-1 Calling up the NCS SENSOR CLEANING screen [screen 4.8]
1-1-2 Cleaning the non-contact setup sensor
1-1-3 Cleaning the non-contact setup sensor with abrasives
[Optional accessory]
1-1-4 Adjusting the non-contact setup amplifier
1-1-5 Completion of cleaning the non-contact setup sensor
E-5
Safety items for cleaning the non-contact setup sensor (detection surface)
WARNING
If any touch panel control is inadvertently activated during
maintenance or inspection, unexpected machine operation may
cause death or serious injury.
While you don't use the touch panel, press the Disco's logo button
located at the upper left of the screen in order to lock up and
deactivate the touch panel.
NOTICE
Neither safety goggles, protective gloves, stepstools, flashlights nor
alcohol, all of which are necessary for maintenance work, are not
supplied with the machine. Use what are furnished in your factory or
what comply with your factory's standards.
Before cleaning
Have on hand the following items for cleaning the non-contact setup sensor.
Cotton swab
Alcohol