DFD6361-Maintenance.pdf - 第253页
C-41 AXIS OPER A TION screen - Photoi nterrupt er status indic ation area (Continu ed) [Function Butto n] See the section 3 of t his chapter , [Ax is Operation Check] .
C-40
AXIS OPERATION screen - Photointerrupter status indication area
The description of the photointerrupter status indication area of theAXIS
OPERATOIN screen is as follows:
[Screen]
[1] [2] [3] [4] [5] [6] [7]
[Setting Item]
Item No. Descriptions
[1]
Shows ON or OFF to indicate the origin position sensor operation
status.
[2]
Shows ON or OFF to indicate the CW sensor operation status.
[3]
Shows ON or OFF to indicate the CCW sensor operation status.
[4]
Indicates whether the setup signal is ON or OFF (Z1- and Z2-
axis).
[5]
Indicates the axis alarm motor driver status.
ON Abnormal
OFF Normal
[6]
Shows ON or OFF to indicate whether the pulse output is being
generated (the axis is operating) or not.
ON Axis in motion
OFF Axis stopped
[7]
Indicates whether the COIN signal (positioning completion signal)
is ON or OFF.
ON The axis reaches the target position.
OFF The axis has not reached the target position.
C-41
AXIS OPERATION screen - Photointerrupter status indication area (Continued)
[Function Button]
See the section 3 of this chapter, [Axis Operation Check].
C-42
5. Customizing Setting
Summary of this section
This section explains about the ways to customize the various machine
functions to suit individual user requirements.
Section No. Title Contents
5-1 Setting on USER
DEFINE DATA Screen
- Procedures to change machine
function settings such as the
permission of speed change and
language to be used, by using the
function buttons