DFD6361-Maintenance.pdf - 第257页
C-45 USER DEFIN E DATA scr een [screen 7.4 ] (Continued) [Setting Ite m] Item No. Descriptions [4] Enter the user password for calling up the MACHINE MAINTENANCE screen [ screen 6.0]. - If no password is enter ed here, t…
C-44
USER DEFINE DATA screen [screen 7.4]
The description of USER DEFINE DATA screen [screen 7.4] is as follows:
[Screen]
[1]
[2]
[3]
[4]
[5]
[6]
[7]
[8]
[9]
[10]
[11]
[12]
[13]
[14]
[15]
[16]
[17]
[18]
[21]
[22]
[23]
[24]
[19]
[20]
[Setting Item]
Item No. Descriptions
[1]
Enter the user-defined machine ID number for management
purposes.
The entered ID number (or name) is displayed on the MAIN
MENU screen [screen 0.0].
[2]
Enter the data password for calling up the DEVICE DATA screen
[screen 3.1.2], SETUP DATA screen [screen 4.7] and the manual
operations of alignment teaching and shape recognition.
- If no password is entered here, the system does not prompt for
password input.
- Data password protected screens can be opened by the function
password, user password or engineering password.
- No password has been entered at factory prior to shipment.
[3]
Enter the function password for calling up the OPERATOR
MAINTENANCE screen [screen 5.0].
- If no password is entered here, the system does not prompt for
password input.
- Function password protected screens can be opened by the user
password or engineering password.
- No password has been entered at factory prior to shipment.
C-45
USER DEFINE DATA screen [screen 7.4] (Continued)
[Setting Item]
Item No. Descriptions
[4]
Enter the user password for calling up the MACHINE
MAINTENANCE screen [screen 6.0].
- If no password is entered here, the system does not prompt for
password input.
- User password protected screens can be opened by the
engineering password.
- The factory preset user password is "123".
[5]
Enter the engineering password for calling up the ENGINEERING
MAINTENANCE screen [screen 7.0].
- If no password is entered here, the system does not prompt for
password input.
- Engineering password protected screens cannot be opened by
other passwords.
- The factory preset engineering password is "123".
[6]
When the <F1> button is pressed from the ENGINEERING
MAINTENANCE screen [screen 7.0] to select the conditioning
operation, the spindle automatically moves. You can specify the
spindle destination in this column.
When a minus value is entered, the Z1-axis side spindle is
automatically moves to rearward from the chuck table center.
[7]
Enter the limit value for the correction distance during the hairline
alignment.
[8]
Enter the table blow-release time for the chuck table vacuum OFF
sequence.
[9]
Enter the table blow-release time for the spinner table vacuum
OFF sequence.
[10]
Specify the length of interval between the spinner cleaning water
turning ON and initiation of monitoring of the cleaning water
pressure.
[11]
Enter the correction value for θ-axis rotation accuracy. This
correction value is effective only for 90-degree rotation.
[12]
Energy-efficient function. The machine measures the length of
time while any operation such as alignment, cut or full automation
is not performed. If no operation is made for a given length of
time, the machine automatically turns OFF the power of the motor
driver and stops air supply.
Specify the time between establishment of the energy-saving mode
and the last machine operation. If zero is entered here, this
function does not work. Note that system initial is required when
the energy-saving mode is canceled.
[13]
Select the language to be used on the screen.
C-46
USER DEFINE DATA screen [screen 7.4] (Continued)
[Setting Item]
Item No. Descriptions
[14]
Specify whether or not to retain any cutting speed changed during
cutting when the relevant device data cutting is completed. If you
select to retain, the modified speed will be used for the next device
data to be cut.
KEEP Retains the changed cutting speed.
CLEAR Clears the changed cutting speed.
[15]
Specify whether or not to permit cutting speed changes during
cutting.
YES Allows you to change the speed no matter whether a
cutting operation is in progress or is temporarily
halted.
NO You cannot change the speed while the cutting
operationisinprogress.
SPEED Permits you to change the speed no matter whether a
cutting operation is in progress or is temporarily
halted. However, if a newly entered speed is higher
than the cutting speed defined by the device data, it is
not accepted.
[16]
Specify the error output mode when a blade breakage is detected.
Z-EM Z-EM operation is immediately performed when a
blade breakage is detected.
In this mode, the error output is generated even in
the middle of one-line cutting.
RECHECK Rechecks the blade breakage after completion of the
current line cutting operation when a blade
breakage is detected.
If a blade breakage is confirmed in the recheck, the
machine indicates the error and stops the cutting
operation.
[17]
Specify whether or not to use the already-cut-work-check function
in the alignment process. If a cut line is detected in a kerf check
which is conducted after individual channel street adjustments in
the alignment process, the error is indicated.
NO No use the above-mentioned check function.
FIRST Confirms only the first workpiece in the cassette in
the FULL AUTO mode operation.
ALWAYS Confirms all the workpieces in the FULL AUTO
mode operation.