DFD6361-Maintenance.pdf - 第704页

ÿ ÿ ÿ G-4 No. 10 30-T06991 MA TERI AL SAFETY DA T A SHEET SECTION 1. CHEMICAL PRODUCT AN D COMP AN Y IDENT IFICA TION PRODUCT NAME. THK AFC Grease PRODUCT TYPE. Lubricatin g grease DA T A PREP ARED. Apr 1 0, 2001 SECTION…

100%1 / 720
G-3
2. Material Safety Data Sheet (MSDS)
Material Safety Data Sheet (MSDS) - Grease-
The Material Safety Data Sheet for the grease used to grease up the axes is
shown here.
ÿ
ÿ
ÿ
G-4
No. 1030-T06991
MATERIAL SAFETY DATA SHEET
SECTION 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
PRODUCT NAME. THK AFC Grease
PRODUCT TYPE. Lubricating grease
DATA PREPARED. Apr 10, 2001
SECTION 2. COMPOSITION / INFORMATION ON INGREDIENTS
MIXTURE. Base oil, thickener and additives
INGREDIENTS AND COMPONENTS(% by mass)
Synthetic lubricants approx. 80
Urea thickener approx. 10
Additives(Rust-preventives, EP agent, etc) approx. 10
UN CLASS AND UN NUMBER.
SECTION 3. HAZARDS IDENTIFICATION
CLASS NAME OF HAZARDOUS CHEMICALS FOR SDS IN JAPAN. Not Applicable.
SECTION 4. FIRST AID MEASURES
EYE CONTACT. Gently rinse the affected eyes with clean water for at least 15 minutes and consult
an ophthalmologist.
SKIN CONTACT. Wash the affected area under running water using a mild soap.
INHALATION. Remove the victim from the contamination immediately to fresh air.
Call a physician if symptom persists.
INGESTION. Do not induce vomiting. Call a physician.
SECTION 5. FIRE FIGHTING MEASURES
EXTINGUISH MEDIA. Dry chemical, Foam, Carbon Dioxide.
FIRE FIGHTING PROCEDURE. Fire-fighters should wear self-contained breathing apparatus with
full face piece operated in positive pressure mode.
SECTION 6. ACCIDENTAL RELEASE MEASURES
Shut off all sources of ignition. Absorb spill with inert materials (e.g., dry sand or earth), then place in a
chemical waste container with covers for disposal, using nonsparking tools.
SECTION 7. HANDLING AND STORAGE
HANDLING. Avoid direct contact with skin or eyes.
Use in the well-ventilated areas.
STORAGE. Should be kept tightly sealed and stored in doors out of direct sunlight.
Keep away from sources of heat, open flames and sparks.
Avoid long storage periods since the product degrades with age.
SECTION 8. EXPOSURE CONTROL / PERSONAL PROTECTION
EXPOSURE.
ENGINEERING MEASURES. Do not use in areas without adequate ventilation.
EYE PROTECTION. Wear protective eyeglasses or chemical safety goggles
if oil mist generated.
HAND, SKIN AND BODY PROTECTION. When prolonged or frequently repeated contact could
occur, use protective clothing such as butyl rubber,
impervious to this material.
ÿ
ÿ
ÿ
G-5
SECTION 9. PHYSICALAND CHEMICAL PROPERTIES
APPEARANCE AND ODOR Brown color, butter-like, mild odor
DENSITY (g/cm
3
)at15°C. About 0.9
SOLUBILITY IN WATER. Negligible
MELTING POINT °C. NA
DROPPING POINT °C. Above 200
BOILING POINT. NA(Not applicable)(High)
SECTION 10. STABILITY AND REACTIVITY
STORAGE STABILITY. This product is stable under normal storage.
INCOMPATIBILITY. Strong oxidizing agents.
DECOMPOSITION PRODUCTS. Carbon oxides, Sulfur oxides, Phosphorous compounds, etc.
POLYMERIZATION. Will not occur.
FLASH POINT (METHOD USED) °C. 201(Seta Close Cup)
SECTION 11. TOXICOLOGICAL INFORMATION
ACUTE TOXICITY Inhalation No data as product
Oral No data as product
CORROSIVE AND IRRITANT PROPERTIES. If prolonged or repeated skin contact occurs, may
cause skin irritation.
If eye contact occurs, may cause eye irritation.
SECTION 12. ECOLOGICAL INFORMATION
No known ecological data.
SECTION 13. DISPOSAL CONSIDERATION
Waste must be disposed of in accordance with federal, state and local environment control
regulations.
SECTION 14. TRANSPORT INFORMATION
Keep away from oxidizing materials and source of ignition.
Japan Fire Protection Law. Non dangerous substance.
UN Recommendations on the Transport of Dangerous Goods. Non dangerous substance.
Follow all regulations in your country.
SECTION 15. REGULATION INFORMATION
Follow all regulations in your country.
SECTION 16. OTHER INFORMATION
REFERENCES.
1) ARC MONOGRAPHS ON THE EVALUATION OF THE CARCINOGENIC RISK OF CHEMICALS
TO HUMANS VOLUME 33
2) Material Safety Data Sheet guidebook(English)(Japan Chemical Industry Association Information
Center)
This Material Safety Data Sheet was prepared on the basis of materials' information, and data
obtained at present by our company. To the best of our knowledge, the information contained here in is
accurate.
Final determination of suitability of all material is the sole responsibility of the user.
All materials may present unknown hazards and should be used in caution.
The information herein is given in good faith, but no warranty express or implied, is made.