Infinity EX Transportation.pdf - 第20页

INFINITY EX TRANSPORT ATION MAJOR RE LOCATION 31.2 0 Technical Reference Manual Chapter Issue 3 Jan 04 arm. 12. Unfasten the keyboard from the velcro securing strips and remov e the ke yboard and cable from the machine. …

INFINITY

TRANSPORTATION

MAJOR RELOCATION

Chapter Issue 3 Jan 04 Technical Reference Manual 31.19

• VGA Cable

• Touchscreen Cable

• Keyboard Cable

• Two Button Control

6. Gain access to bracket (Pt No 156875) located on the right hand side of the

lower frame.

7. Disconnect the cables from the MMI to the following connectors fitted to the

bracket:

• Two Button Control (14PL08) - 14SK08

• Infrared Transmitter/Receiver (14SK29) - 14PL29

• VGA Cable (14SK04) - 14PL04

• Touchscreen (14SK02) - 14PL02

8. Disconnect the keyboard and mouse 6 way din connectors at sockets 14SK05

and 14SK06 respectively.

9. Disconnect the monitor power supply cable at 14SK11.

10.Remove the disconnected MMI cables from the machine.

11.Remove the end stop pin from the slot below the keyboard in the lower MMI

INFINITY

TRANSPORTATION

MAJOR RELOCATION

31.20 Technical Reference Manual Chapter Issue 3 Jan 04

arm.

12.Unfasten the keyboard from the velcro securing strips and remove the

keyboard and cable from the machine.

13.Lift off the MMI assembly, tube and keyboard tray from the MMI arm.

14.Slide the machine right hand access panel off of the MMI arm.

15.Disconnect the MMI arm earth cable from the machine upper frame earth

point.

16.Loosen and remove the M12 nyloc nut, M12 plain washer, large stainless

steel spacer and smaller friction washer from the mounting bracket pivot

post.

17.Lift off the MMI arm from the pivot post.

18.Refit the right hand corner access panel to the machine.

Removal of 15″

MMI Assembly

The following procedure details how to remove the MMI assembly from the

machine.

NOTE

Ensure that the machine is switched OFF at the mains isolator.

1. Unfasten the machine front right corner access panel, by releasing the three

quick release fasteners. Unplug the E Stop connector from the back of the

corner panel and disconnect the System button at plug 8PL114. Release the

ESD cable by pulling the cable spade connector from the capacitor fixing

point.

2. At the rear of the monitor, remove the following connections on the rear of

the monitor:

• Monitor Power Cable - Power DC-IN

• SVGA Cable (M16PL02) - Display Input

End Stop Pin

INFINITY

TRANSPORTATION

MAJOR RELOCATION

Chapter Issue 3 Jan 04 Technical Reference Manual 31.21

• Touchscreen Cable (M16PL01) - Touch RS-232

3. Unclip the cable conduit from behind the MMI arm.

4. Carefully remove the following cables from the cable conduit utilizing the

slot in the conduit:

• Monitor Power Supply Cable

• SVGA Cable

• Touchscreen Cable

• Keyboard Cable

• Two Button Control

5. Gain access to bracket (Pt No 156875) located on the right hand side of the

lower frame.

6. Disconnect the cables from the MMI to the following connectors fitted to the

bracket:

• Two Button Control (14PL08) - 14SK08

• SVGA Cable (14SK04) - 14PL04

• Touchscreen (14SK02) - 14PL02

• Keyboard Mouse (14PL06) - 14SK06

• Keyboard (14PL05) - 14SK05 if Product Barcode Reader not fitted

NOTE

For machines with the product barcode disconnect the mini-DIN socket from

14PL05 from the keyboard. Disconnect the scanner mini-DIN plug from

14SK05 to the machine PC.

7. Remove the disconnected MMI cables from the machine.