instruction-manual-product-monitoring-data-acquisition-monitouch-V9-hardware-en.pdf - 第32页
2 1. Advanced Model 2-1 Specifications 1. Advanced Model General Specifications *1 This product complies with th e following radio laws: TELEC (Japanese Radio Law: T echnical Regula tions Conformity Certification, Arti…
2
1. Advanced Model 2-1
Specifications
1. Advanced Model
General Specifications
*1 This product complies with the following radio laws:
TELEC (Japanese Radio Law: Technical Regulations Conformity Certification, Article 2, clause 1-19)
FCC Part15 SubPart C
IC RSS-210,RSS-Gen
RE: EN300328, EN301489-1, EN301489-17, EN62311, EN60950-1
KC
The product will not conform to the above laws if using any antenna other than the built-in antenna of the V9
series unit or the optional V9-ANT for wireless LAN connection.
Item V9101iW V9100iW V9071iW V9070iW
Conformance Standards
KC, CE (EN61000-6-2, EN61000-6-4, EN50581), UL508 (File No.E313548),
Radio laws (Japan: TELEC, USA: FCC, Canada: IC RSS, Europe: RE, South Korea: KC)
*1
Power Supply
Permissible Voltage
Range
24 VDC 10 %
Permissible
Momentary Power
Failure
Within 1 ms
Power Consumption
(Max. Rating)
27 W or less 22 W or less
Rush Current
17 A or less, 6 ms
(surrounding air temperature at 25 °C)
10 A or less, 6 ms
(surrounding air temperature at 25 °C)
Withstand Voltage DC external terminals to FG: 500 VAC for 1 minute
Insulation Resistance DC external terminals to FG: 500 VDC, 10 M or higher
Physical Environment
Surrounding Air
Temperature
0 °C to +50 °C
*2
Storage
Surrounding Air
Temperature
10 °C to +60 °C
*2
Operational
Ambient Humidity
85 % RH or less (without dew condensation)
*2
Storage Ambient
Humidity
85 % RH or less (without dew condensation)
*2
Altitude 2000 m or less
Atmosphere No corrosive gas, no excessive dust, and no conductive dust
Overvoltage
Category
*3
Category II
Contamination
Level
*4
Contamination level 2
Mechanical
Working
Conditions
Vibration
Resistance
JIS B 3502 (IEC61131-2) compliant
Vibration frequency: 5 to 9 Hz, Half-amplitude: 3.5 mm, Vibration frequency: 9 to 150 Hz, Constant
acceleration: 9.8 m/s
2
(1 G),
X, Y, and Z: 3 directions (10 times each)
Shock Resistance
JIS B 3502 (IEC61131-2) compliant
Peak acceleration: 147 m/s
2
(15 G), X, Y, and Z: 3 directions, 3 times each (18 times in total)
Electrical
Working
Conditions
Noise Resistance
Noise voltage: 1000 Vp-p, Pulse width: 1 s, Rising time: 1 ns
(Measured using a noise simulator)
Static Electricity
Discharge
Resistance
Compliant with IEC61000-4-2, contact: 6 kV, air: 8 kV
Mounting
Conditions
Weight Approx. 1.7 kg Approx. 1.0 kg
Dimensions
W H D
278.5 198.5 54.4
mm
278.5 198.5 53.2
mm
201.6 147.6 60.3
mm
201.6 147.6 59.1
mm
Panel Cut-out
Dimensions
257.0 183.0 mm 187.2 133.4 mm
Case Color Light gray
Material PC resin
+0.5
0
+0.5
0
+0.5
0
+0.5
0
2-2 1. Advanced Model
*2 Use the unit in an environment where the wet-bulb temperature is 39 C or less, otherwise the unit may be
damaged.
*3 This indicates the distribution section to which the unit is intended to be connected to within the path between
the distribution of the public power network and machinery in the facility.
“Category II” applies to devices supplied with power from mains sockets or similar points. The withstand surge
voltage is 2,500 V for devices rated up to 300 V.
*4 This is an index that expresses the degree of conductive contamination in the environment where the unit is
used.
“Contamination level 2” indicates the conditions where only non-conductive contamination occurs. However,
due to condensation, temporary conductive contamination may occur.
Installation Specifications
*1 Protective structure for the front when the V9 series unit is mounted on a mounting panel.
While the protective structure has passed compliance testing, it is not guaranteed under all environments.
*2 Applies to V910xiW from hardware version c and later.
*3 Even when the mounting panel thickness is within the specified range, the panel itself may warp depending on
the material and size of the mounting panel.
Use a panel that can withstand the forces of mounting.
Display Specifications
*1 Only for displaying “picture” images, 3D parts and video images. All other content is displayed using 65,536
colors.
*2 Time until the surface brightness becomes 50 % of the initial value at an ambient temperature of 25 C.
Item Specification
Grounding Less than 100 , FG/SG separated
Protection Structure
Panel Front Surface
*1
Complies with IP66, Type 4X/13
*2
(when waterproof gasket is installed)
Rear Case Complies with IP20
Cooling System Natural cooling
Structure Inserted in a mounting panel
Appropriate Mounting Panel Thickness
1.5 to 4 mm
*3
Item V9101iW V9100iW V9071iW V9070iW
Display Device TFT color
Display Size 10.1-inch widescreen 7.0-inch widescreen
Colors
16.77 million colors
*1
Resolution (W H) 1024 600 dots 800 480 dots
Dot Pitch (W H) 0.2175 0.2088 mm 0.1905 0.1905 mm
Actual Display Dimensions
(W H)
222.72 125.28 mm 152.4 91.44 mm
Backlight LED
Backlight Brightness
Halftime
*2
Approx. 50,000 hours Approx. 100,000 hours
Backlight Auto OFF Function Always ON, custom setting
Brightness Adjustment
System menu: 16 levels
Macro: 128 levels
Touch Panel Operation
Surface
Touch panel
(Glass)
Surface sheet
(PET, 0.188 mm)
Touch panel
(Glass)
Surface sheet
(PET, 0.188 mm)
POWER Lamp
On: Normal (green)
Flashing: Circuit board or power supply failure