instruction-manual-product-monitoring-data-acquisition-monitouch-V9-hardware-en.pdf - 第47页

2-16 2. Standard Model *1 For details, refer t o the V9 Series Connection Manual 1. *2 Only for additional wired LAN I/ F models. *3 Both straight and cross cables are usable, ir respective of the pres ence or absence of…

100%1 / 122
2
2. Standard Model 2-15
Specifications
*1 Only for displaying “picture” images, 3D parts and video images. All other content is displayed using 65,536
colors.
*2 Time until the surface brightness becomes 50 % of the initial value at an ambient temperature of 25 C.
Touch Switch Specifications
Wireless LAN Specifications (Only for Wireless LAN I/F Models)
* For details of other wireless LAN specifications, refer to page 3-22.
Function Switch Specifications
Interface Specifications
Item Specification
Type Analog resistance film type
Switch Resolution 1024 1024
Mechanical Life One million activations or more
Surface Treatment Anti-glare treatment
Item Specification
Complying Antennas
Built-in antenna of the V9 series unit
V9-ANT (optional): External dipole antenna for wireless LAN
Item Specification
Number of Switches 8
Type Membrane switch
Mechanical Life One million activations or more
Item Specification
D-sub 9-pin (CN1)
Applicable
Standards
RS-232C, RS-485 (2-wire connection), RS-422 (4-wire connection)
Synchronization Asynchronous type
Data Length 7 or 8 bits
Parity None, even, odd
Stop Bit 1 or 2 bits
Baud Rate
4800, 9600, 19200, 38400, 57600, 76800, 115 kbps
(For PPI/MPI connection with a Siemens PLC: 187.5 kbps
*1
)
Applications PLC, temperature controller, barcode reader connection, etc.
Modular Jack, 8-pin
(MJ1, MJ2)
Applicable
Standards
RS-232C, RS-485 (2-wire connection)
Baud Rate 4800, 9600, 19200, 38400, 57600, 76800, 115 kbps
Applications
Screen program transfer (MJ1), PLC, temperature controller, barcode reader,
printer, multi-link2, V-Link connection, etc.
USB Connector
(U-A / U-B)
USB-A
Applicable
Standards
Compliant with USB version 2.0
Baud Rate High speed 480 Mbps
Applications
Printer (EPSON ESC/P-R driver), USB flash drive, keyboard, mouse connection,
etc.
2-16 2. Standard Model
*1 For details, refer to the V9 Series Connection Manual 1.
*2 Only for additional wired LAN I/F models.
*3 Both straight and cross cables are usable, irrespective of the presence or absence of a hub.
*4 Only for wireless LAN I/F models.
Clock and Backup Memory Specifications
* When using the unit at an ambient temperature other than 25 C, clock deviation may increase. Check and
correct the clock periodically.
USB Connector
(U-A / U-B)
USB mini-B
Applicable
Standards
Compliant with USB version 2.0
Baud Rate High speed 480 Mbps
Applications Screen program transfer, PictBridge-compatible printer connection
Ethernet Port
100BASE-TX /
10BASE-T
(LAN / LAN2
*2
)
Applicable
Standards
IEEE802.3u compliant (100BASE-TX), IEEE802.3 compliant (10BASE-T)
Baud Rate 10 Mbps, 100 Mbps
Protocol TCP/IP, UDP/IP
Functions Auto-MDIX, Auto-Negotiation
Recommended
Cable
*3
100 UTP (unshielded twist-pair) cable, category 5, max. 100 m long
Applications Screen program transfer, PLC connection, etc.
Connector for Wireless LAN Dipole
Antenna (WLAN)
*4
Reverse polarity SMA jack
SD Card Interface SD/SDHC card support
Communication Interface Unit Connector
(EXT1)
Communication interface unit “CUR-xx” (for SX-BUS, OPCN-1, T-Link, Ethernet,
CC-Link, PROFIBUS-DP, DeviceNet, and FL-net) connection
Connector for Optional Unit (EXT2) Optional unit “GUR-xx” (for RGB input, RGB output, and video input) connection
Audio Output Connector (AUDIO) 3.5 mm stereo mini jack
Item Specification
Item Specification
Battery
Coin-type lithium primary cell
(V9-BT manufactured by Hakko Electronics or CR2450S)
Backup Memory SRAM, 800 KB
Backup Retention Period Approx. 5 years (ambient temperature at 25 C)
Battery Voltage Drop Detection Provided (allocated the internal device memory address $s167)
Calendar Accuracy
*
When powered: Monthly deviation of 210 sec. (ambient temperature at 25 C)
When unpowered: Monthly deviation of 90 sec. (ambient temperature at 25 C, with
battery backup)
2
2. Standard Model 2-17
Specifications
Screen Configuration Environment
*1 Administrator privileges are required for installation.
Display Function Specifications
*1 For more information, refer to the V9 Series Reference Manual 1.
Item Specification
Configuration Method Dedicated configuration software
Configuration Tool
Name of dedicated configuration software: V-SFT-6
Computer: Pentium IV 2.0 GHz or above recommended
OS
*1
: Windows XP/ XP64 Edition/ Vista (32 bit, 64 bit) / 7 (32 bit,
64 bit) / 8 (32 bit, 64 bit) / 8.1 (32 bit, 64 bit) / 10 (32 bit, 64 bit)
Memory: 1.0 GB or above (2.0 GB or above recommended)
Hard disk capacity: Free space of approx. 2.0 GB or more
Optical disc drive: DVD-ROM drive
Display: Resolution of 1024 768 or above
Color depth of 16-bit or more
Other: Microsoft. NET Framework 4.0 or 4.5
(If a PC does not have .NET Framework 4.0 or 4.5 installed,
Framework 4.0 will be automatically installed on the PC.)
Item Specification
Interface Language
*1
Japanese, English/Western Europe, Chinese (Traditional), Chinese (Simplified), Korean,
Central Europe, Cyrillic, Greek, Turkish, and Baltic
Font Types TrueType fonts, Bitmap fonts, Window fonts, Gothic fonts
Character
Properties
Display Properties Normal, blink, bold, shadow, transparent, italic
Colors 65,536 colors (without blinking) / 32,768 colors (with blinking)
Graphics
Lines Line, continuous line, box, parallelogram, polygon
Circles Circle, arc, sector, ellipse, elliptical arc
Others Pattern, image, data display (graphics library, data sheets)
Graphic
Properties
Line Types
6 types (thin, thick, dotted, chain, dashed, two-dot chain)
Line thickness can be selected from 1 to 8 points (excluding thick lines).
Tile Patterns 16 types (including 8 user-definable patterns)
Display Properties Normal, blinking
Colors 65,536 colors (without blinking) / 32,768 colors (with blinking)
Color Selection Foreground, background, boundary (line)