instruction-manual-product-monitoring-data-acquisition-monitouch-V9-hardware-en.pdf - 第55页

2-24 3. Lite Model *1 Use the unit in an environment where the wet-bulb t emperature is 39  C or less, otherwise the unit may be damaged. *2 This indicates t he distribution section to which the unit is intended to be …

100%1 / 122
2
3. Lite Model 2-23
Specifications
3. Lite Model
General Specifications
Item V9100iC V9100iCD V9080iCD V9060iTD
Standards KC
KC
CE (EN61000-6-2, EN61000-6-4, EN50581)
UL508 (File No. E313548)
KC
CE (EN61000-6-2,
EN61000-6-4,
EN50581)
UL508
(File No. E313548)
ANSI/ISA 12.12.01
(File No. E315977)
Power Supply
Permissible Voltage
Range
100 to 240 VAC
-15 % to +10 %
(47 to 63 Hz)
24 VDC 10 %
Permissible
Momentary Power
Failure
Within 20 ms
(100 VAC or higher)
Within 1 ms
Power Consumption
(Max. Rating)
50 VA or less 17 W or less 13 W or less
Rush Current
30 A or less, 3 ms
(surrounding air
temperature at 25 °C)
17 A or less, 6 ms
(surrounding air temperature at 25 °C)
8 A or less, 7 ms
(surrounding air
temperature at 25 °C)
Withstand Voltage
AC external terminals to FG: 1,500 VAC for 1 minute,
DC external terminals to FG: 500 VAC for 1 minute
Insulation Resistance
AC external terminals to FG: 500 VDC at 10 M or more,
DC external terminals to FG: 500 VDC at 10 M or more
Physical Environment
Surrounding Air
Temperature
0 C to +50 C
*1
Storage Surrounding
Air Temperature
10 C to +60 C
*1
Operational Ambient
Humidity
85 % RH or less (without dew condensation)
*1
Storage Ambient
Humidity
85 % RH or less (without dew condensation)
*1
Altitude 2000 m or less
Atmosphere No corrosive gas, no excessive dust, and no conductive dust
Overvoltage
Category
*2
Category II
Contamination
Level
*3
Contamination level 2
Mechanical
Working
Conditions
Vibration Resistance
JIS B 3502 (IEC61131-2) compliant
Vibration frequency: 5 to 9 Hz Half-amplitude: 3.5 mm, Vibration frequency: 9 to 150 Hz Constant
acceleration: 9.8 m/s
2
(1 G), X, Y, and Z: 3 directions (10 times each)
Shock Resistance
JIS B 3502 (IEC61131-2) compliant
Peak acceleration: 147 m/s
2
(15 G),
X, Y, and Z: 3 directions, 3 times each (18 times in total)
Electrical
Working
Conditions
Noise Resistance
Noise voltage: 1500 Vp-p, Pulse width: 1 s, Rising time: 1 ns
(Measured using a noise simulator)
Noise voltage:
1000 Vp-p, Pulse
width: 1 s, Rising
time: 1 ns
(Measured using a
noise simulator)
Static Electricity
Discharge Resistance
Compliant with IEC61000-4-2, contact: 6 kV, air: 8 kV
Mounting
Conditions
Weight Approx. 2.0 kg Approx. 1.3 kg Approx. 740 g
Dimensions
W H D
303.8 231.0 54.0 mm
235.0 180.0 48.9
mm
182.5 138.8 53.0
mm
Panel Cut-out
Dimensions
289.0 216.2 mm
220.5 165.5
mm
174.0 131.0
mm
+0.5
0
+0.5
0
+0.5
0
+0.5
0
+0.5
0
+0.5
0
2-24 3. Lite Model
*1 Use the unit in an environment where the wet-bulb temperature is 39C or less, otherwise the unit may be
damaged.
*2 This indicates the distribution section to which the unit is intended to be connected to within the path between
the distribution of the public power network and machinery in the facility.
“Category II” applies to devices supplied with power from mains sockets or similar points. The withstand surge
voltage is 2,500 V for devices rated up to 300 V.
*3 This is an index that expresses the degree of conductive contamination in the environment where the unit is
used.
“Contamination level 2” indicates the condition where only non-conductive contamination occurs. However, due
to condensation, temporary conductive contamination may occur.
Installation Specifications
*1 Protective structure for the front when the V9 series unit is mounted on a mounting panel.
While the protective structure has passed compliance testing, it is not guaranteed under all environments.
*2 Applies to V9100 and V9080 from hardware version b and later.
*3 Even when the mounting panel thickness is within the specified range, the panel itself may warp depending on
the material and size of the mounting panel.
Use a panel that can withstand the forces of mounting.
Display Specifications
*1 Only for displaying “picture” images and 3D parts. All other content is displayed using 65,536 colors.
*2 Time until the surface brightness becomes 50 % of the initial value at an ambient temperature of 25 C.
Case Color Light gray
Material PC resin
Item V9100iC V9100iCD V9080iCD V9060iTD
Item V9100iC V9100iCD/V9080iCD/V9060iTD
Grounding Less than 100 , FG/SG separated
Protection Structure
Panel Front Surface
*1
Complies with IP66 (when waterproof
gasket is installed)
Complies with IP66, Type 4X/13
*2
(when waterproof gasket is installed)
Rear Case Equivalent to IP20
Cooling System Natural cooling
Structure Inserted in a mounting panel
Appropriate Mounting Panel Thickness
1.5 to 4 mm
*3
Item V9100iC V9080iC V9060iTD
Display Device TFT color
Display Size 10.4-inch 8.4-inch 5.7-inch
Colors
16.77 million colors
*1
262 thousand colors
Resolution (W H) 640 480 dots
Dot Pitch (W H) 0.33 0.33 mm 0.267 0.267 mm 0.18 0.18 mm
Actual Display Dimensions
(W H)
211.2 158.4 mm 170.88 128.16 mm 115.2 86.4 mm
Backlight LED
Backlight Brightness
Halftime
*2
Approx. 70,000 hours Approx. 50,000 hours
Backlight Auto OFF Function Always ON, custom setting
Brightness Adjustment
System menu: 16 levels
Macro: 128 levels
Touch Panel Operation
Surface
Surface sheet (PET, 0.188 mm)
POWER Lamp
On: Normal (green)
Flashing: Backlight, circuit board or power supply failure
2
3. Lite Model 2-25
Specifications
Touch Switch Specifications
Function Switch Specifications
Interface Specifications
Item Specification
Type Analog resistance film type
Switch Resolution 1024 1024
Mechanical Life One million activations or more
Surface Treatment Anti-glare treatment
Item V9100iC/V9080iCD V9060iTD
Number of Switches 8 6
Type Membrane switch
Mechanical Life One million activations or more
Item Specification
D-sub 9-pin (CN1)
Applicable
Standards
RS-232C, RS-485 (2-wire connection), RS-422 (4-wire connection)
Synchronization Asynchronous type
Data Length 7 or 8 bits
Parity None, even, odd
Stop Bit 1 or 2 bits
Baud Rate
4800, 9600, 19200, 38400, 57600, 76800 bps, 115 kbps
(For PPI/MPI connection with a Siemens PLC: 187.5 kbps
*2 *3
)
Applications PLC, temperature controller, barcode reader connection, etc.
Modular Jack, 8-pin
(MJ1, MJ2
*3
)
Applicable
Standards
RS-232C, RS-485 (2-wire connection)
Baud Rate 4800, 9600, 19200, 38400, 57600, 76800 bps, 115 kbps
Applications
Screen program transfer (MJ1), PLC, temperature controller, barcode reader,
printer, multi-link2, V-Link connection, etc.
Modular Jack, 8-pin
(MJ2
*4
)
Applicable
standards
RS-232C, RS-485 (2-wire connection), RS-422 (4-wire connection)
Baud Rate
4800, 9600, 19200, 38400, 57600, 76800, 115k bps
(For PPI/MPI connection with a Siemens PLC: 187.5 kbps
*2
)
Applications PLC, temperature controller, barcode reader connection, etc.
USB Connector
(U-A / U-B)
USB-A
Applicable
Standards
Compliant with USB version 2.0
Baud Rate High speed 480 Mbps
Applications
Printer (EPSON ESC/P-R driver), USB flash drive, keyboard, mouse connection,
etc.
USB mini-B
Applicable
Standards
Compliant with USB version 2.0
Baud Rate High speed 480 Mbps
Applications Screen program transfer, PictBridge-compatible printer connection