instruction-manual-product-monitoring-data-acquisition-monitouch-V9-hardware-en.pdf - 第56页

2 3. Lite Model 2-25 Specifications T ouch Switch Specifications Function Switch Specifications Interface Specifications Item Specifi cation T ype Analog resistan ce film type Switch Resolution 1024  1024 Mechanical Lif…

100%1 / 122
2-24 3. Lite Model
*1 Use the unit in an environment where the wet-bulb temperature is 39C or less, otherwise the unit may be
damaged.
*2 This indicates the distribution section to which the unit is intended to be connected to within the path between
the distribution of the public power network and machinery in the facility.
“Category II” applies to devices supplied with power from mains sockets or similar points. The withstand surge
voltage is 2,500 V for devices rated up to 300 V.
*3 This is an index that expresses the degree of conductive contamination in the environment where the unit is
used.
“Contamination level 2” indicates the condition where only non-conductive contamination occurs. However, due
to condensation, temporary conductive contamination may occur.
Installation Specifications
*1 Protective structure for the front when the V9 series unit is mounted on a mounting panel.
While the protective structure has passed compliance testing, it is not guaranteed under all environments.
*2 Applies to V9100 and V9080 from hardware version b and later.
*3 Even when the mounting panel thickness is within the specified range, the panel itself may warp depending on
the material and size of the mounting panel.
Use a panel that can withstand the forces of mounting.
Display Specifications
*1 Only for displaying “picture” images and 3D parts. All other content is displayed using 65,536 colors.
*2 Time until the surface brightness becomes 50 % of the initial value at an ambient temperature of 25 C.
Case Color Light gray
Material PC resin
Item V9100iC V9100iCD V9080iCD V9060iTD
Item V9100iC V9100iCD/V9080iCD/V9060iTD
Grounding Less than 100 , FG/SG separated
Protection Structure
Panel Front Surface
*1
Complies with IP66 (when waterproof
gasket is installed)
Complies with IP66, Type 4X/13
*2
(when waterproof gasket is installed)
Rear Case Equivalent to IP20
Cooling System Natural cooling
Structure Inserted in a mounting panel
Appropriate Mounting Panel Thickness
1.5 to 4 mm
*3
Item V9100iC V9080iC V9060iTD
Display Device TFT color
Display Size 10.4-inch 8.4-inch 5.7-inch
Colors
16.77 million colors
*1
262 thousand colors
Resolution (W H) 640 480 dots
Dot Pitch (W H) 0.33 0.33 mm 0.267 0.267 mm 0.18 0.18 mm
Actual Display Dimensions
(W H)
211.2 158.4 mm 170.88 128.16 mm 115.2 86.4 mm
Backlight LED
Backlight Brightness
Halftime
*2
Approx. 70,000 hours Approx. 50,000 hours
Backlight Auto OFF Function Always ON, custom setting
Brightness Adjustment
System menu: 16 levels
Macro: 128 levels
Touch Panel Operation
Surface
Surface sheet (PET, 0.188 mm)
POWER Lamp
On: Normal (green)
Flashing: Backlight, circuit board or power supply failure
2
3. Lite Model 2-25
Specifications
Touch Switch Specifications
Function Switch Specifications
Interface Specifications
Item Specification
Type Analog resistance film type
Switch Resolution 1024 1024
Mechanical Life One million activations or more
Surface Treatment Anti-glare treatment
Item V9100iC/V9080iCD V9060iTD
Number of Switches 8 6
Type Membrane switch
Mechanical Life One million activations or more
Item Specification
D-sub 9-pin (CN1)
Applicable
Standards
RS-232C, RS-485 (2-wire connection), RS-422 (4-wire connection)
Synchronization Asynchronous type
Data Length 7 or 8 bits
Parity None, even, odd
Stop Bit 1 or 2 bits
Baud Rate
4800, 9600, 19200, 38400, 57600, 76800 bps, 115 kbps
(For PPI/MPI connection with a Siemens PLC: 187.5 kbps
*2 *3
)
Applications PLC, temperature controller, barcode reader connection, etc.
Modular Jack, 8-pin
(MJ1, MJ2
*3
)
Applicable
Standards
RS-232C, RS-485 (2-wire connection)
Baud Rate 4800, 9600, 19200, 38400, 57600, 76800 bps, 115 kbps
Applications
Screen program transfer (MJ1), PLC, temperature controller, barcode reader,
printer, multi-link2, V-Link connection, etc.
Modular Jack, 8-pin
(MJ2
*4
)
Applicable
standards
RS-232C, RS-485 (2-wire connection), RS-422 (4-wire connection)
Baud Rate
4800, 9600, 19200, 38400, 57600, 76800, 115k bps
(For PPI/MPI connection with a Siemens PLC: 187.5 kbps
*2
)
Applications PLC, temperature controller, barcode reader connection, etc.
USB Connector
(U-A / U-B)
USB-A
Applicable
Standards
Compliant with USB version 2.0
Baud Rate High speed 480 Mbps
Applications
Printer (EPSON ESC/P-R driver), USB flash drive, keyboard, mouse connection,
etc.
USB mini-B
Applicable
Standards
Compliant with USB version 2.0
Baud Rate High speed 480 Mbps
Applications Screen program transfer, PictBridge-compatible printer connection
2-26 3. Lite Model
*1 For the V9060iTD, the optional “DUR-00” unit (PPI/MPI connection with a Siemens PLC is invalid) must be
attached.
*2 For details, refer to V9 Series Connection Manual 1.
*3 Only for V9100iC and V9080iCD.
*4 Only for V9060iTD.
*5 Both straight and cross cables are usable, irrespective of the presence or absence of a hub.
Clock and Backup Memory Specifications
* When using the unit at an ambient temperature other than 25 C, clock deviation may increase. Check and
correct the clock periodically.
Screen Configuration Environment
*1 Administrator privileges are required for installation.
Ethernet Port
100BASE-TX /
10BASE-T
(LAN)
Applicable
Standards
IEEE802.3u compliant (100BASE-TX), IEEE802.3 compliant (10BASE-T)
Baud Rate 10 Mbps, 100 Mbps
Protocol TCP/IP, UDP/IP
Functions Auto-MDIX, Auto-Negotiation
Recommended
Cable
*5
100 UTP (unshielded twist-pair) cable, category 5, max. 100 m long
Applications Screen program transfer, PLC connection, etc.
SD Card Interface SD/SDHC card support
Communication Interface Unit Connector
(EXT1)
Optional unit “DUR-00”
*4
and communication interface unit “CUR-xx” (for SX-BUS,
OPCN-1, T-Link, Ethernet, CC-Link, PROFIBUS-DP, DeviceNet, and FL-net)
connection
* The “DUR-00” and “CUR-xx” cannot be used at the same time.
Item Specification
Item V9100iC/V9080iCD V9060iTD
Battery
Coin-type lithium primary cell
(V9-BT manufactured by Hakko Electronics
or CR2450S)
Coin-type lithium primary cell
(V7-BT manufactured by Hakko
Electronics)
Backup Memory SRAM, 800 KB
Backup Retention Period Approx. 5 years (ambient temperature at 25 C)
Battery Voltage Drop Detection Provided (allocated the internal device memory address $s167)
Calendar Accuracy
*
When powered: Monthly deviation of 210 sec. (ambient temperature at 25 C)
When unpowered: Monthly deviation of 90 sec. (ambient temperature at 25 C, with
battery backup)
Item Specification
Configuration Method Dedicated configuration software
Configuration tool
Name of exclusive configuration software: V-SFT-6
Computer: Pentium IV 2.0 GHz or above recommended
OS
*1
: Windows XP / XP64 Edition / Vista (32 bit, 64 bit) / 7 (32 bit,
64 bit) / 8 (32 bit, 64 bit) / 8.1 (32 bit, 64 bit) / 10 (32 bit, 64 bit)
Memory: 1.0 GB or above (2.0 GB or above recommended)
Hard disk capacity: Free space of approx. 2.0 GB or more
Optical disc drive: DVD-ROM drive
Display: Resolution 1024 768 or above
Color depth of 16-bit or more
Other: Microsoft. NET Framework 4.0 or 4.5
(If a PC does not have .NET Framework 4.0 or 4.5 installed,
Framework 4.0 will be automatically installed on the PC.)