instruction-manual-product-monitoring-data-acquisition-monitouch-V9-hardware-en.pdf - 第46页
2 2. Standard Model 2-15 Specifications *1 Only for displaying “pi cture” images, 3D parts and video images. All other content is displayed using 65,536 colors. *2 T ime until the surface brightness becomes 50 % of the i…
2-14 2. Standard Model
*1 Excluding models that support wireless LAN (V9150iXRD, V9120iSRD, V9100iSRD, V9080iSRD)
*2 Only for V9120iSD, V9100iSD, V9080iSD.
*3 Only models that support wireless LAN (V9150iXRD, V9120iSRD, V9100iSRD, V9080iSRD) are compliant
with:
TELEC (Japanese Radio Law: Technical Regulations Conformity Certification, Article 2, clause 1-19)
The V9 series unit will not conform to the above laws if using any antenna other than the built-in antenna or the
optional V9-ANT for wireless LAN connection.
*4 Use the unit in an environment where the wet-bulb temperature is 39 C or less, otherwise the unit may be
damaged.
*5 This indicates the distribution section to which the unit is intended to be connected to within the path between
the distribution of the public power network and machinery in the facility.
“Category II” applies to devices supplied with power from mains sockets or similar points. The withstand surge
voltage is 2,500 V for devices rated up to 300 V.
*6 This is an index that expresses the degree of conductive contamination in the environment where the unit is
used.
“Contamination level 2” indicates the condition where only non-conductive contamination occurs. However, due
to condensation, temporary conductive contamination may occur.
Installation Specifications
*1 Protective structure for the front when the V9 series unit is mounted on a mounting panel.
While the protective structure has passed compliance testing, it is not guaranteed under all environments.
*2 Only for UL508 compliant models. Applies to V9120, V9100 and V9080 from hardware version b and later.
*3 Even when the mounting panel thickness is within the specified range, the panel itself may warp depending on
the material and size of the mounting panel.
Use a panel that can withstand the forces of mounting.
Display Specifications
Case Color Light gray
Material PC resin
Item V9100iS V9100iSD V9080iSD
Item V9150iX V9120iS/V9100iS/V9080iSD
Grounding Less than 100 , FG/SG connected Less than 100 , FG/SG separated
Protection Structure
Panel Front Surface
*1
Complies with IP66, Type 4X/13
*2
(when waterproof gasket is installed)
Rear Case Equivalent to IP20
Cooling System Natural cooling
Structure Inserted in a mounting panel
Appropriate Mounting Panel Thickness
1.5 to 4 mm
*3
Item V9150iX V9120iS V9100iS V9080iS
Display Device TFT color
Display Size 15.0-inch 12.1-inch 10.4-inch 8.4-inch
Colors
16.77 million colors
*1
Resolution (W H) 1024 768 dots 800 600 dots
Dot Pitch (W H) 0.297 0.297 mm 0.3075 0.3075 mm 0.264 0.264 mm 0.213 0.213 mm
Actual Display Dimensions
(W H)
304.1 228.1 mm 246.0 184.5 mm 211.2 158.4 mm 170.4 127.8 mm
Backlight LED
Backlight Brightness Halftime
*2
Approx. 100,000
hours
Approx. 70,000 hours
Backlight Auto OFF Function Always ON, custom setting
Brightness Adjustment
System menu: 16 levels
Macro: 128 levels
Touch Panel Operation Surface
Surface sheet
(PET, 0.188 mm)
Surface sheet
(PC, 0.3 mm)
Surface sheet (PET, 0.188 mm)
POWER Lamp
On: Normal (green)
Flashing: Backlight, circuit board or power supply failure
2
2. Standard Model 2-15
Specifications
*1 Only for displaying “picture” images, 3D parts and video images. All other content is displayed using 65,536
colors.
*2 Time until the surface brightness becomes 50 % of the initial value at an ambient temperature of 25 C.
Touch Switch Specifications
Wireless LAN Specifications (Only for Wireless LAN I/F Models)
* For details of other wireless LAN specifications, refer to page 3-22.
Function Switch Specifications
Interface Specifications
Item Specification
Type Analog resistance film type
Switch Resolution 1024 1024
Mechanical Life One million activations or more
Surface Treatment Anti-glare treatment
Item Specification
Complying Antennas
Built-in antenna of the V9 series unit
V9-ANT (optional): External dipole antenna for wireless LAN
Item Specification
Number of Switches 8
Type Membrane switch
Mechanical Life One million activations or more
Item Specification
D-sub 9-pin (CN1)
Applicable
Standards
RS-232C, RS-485 (2-wire connection), RS-422 (4-wire connection)
Synchronization Asynchronous type
Data Length 7 or 8 bits
Parity None, even, odd
Stop Bit 1 or 2 bits
Baud Rate
4800, 9600, 19200, 38400, 57600, 76800, 115 kbps
(For PPI/MPI connection with a Siemens PLC: 187.5 kbps
*1
)
Applications PLC, temperature controller, barcode reader connection, etc.
Modular Jack, 8-pin
(MJ1, MJ2)
Applicable
Standards
RS-232C, RS-485 (2-wire connection)
Baud Rate 4800, 9600, 19200, 38400, 57600, 76800, 115 kbps
Applications
Screen program transfer (MJ1), PLC, temperature controller, barcode reader,
printer, multi-link2, V-Link connection, etc.
USB Connector
(U-A / U-B)
USB-A
Applicable
Standards
Compliant with USB version 2.0
Baud Rate High speed 480 Mbps
Applications
Printer (EPSON ESC/P-R driver), USB flash drive, keyboard, mouse connection,
etc.
2-16 2. Standard Model
*1 For details, refer to the V9 Series Connection Manual 1.
*2 Only for additional wired LAN I/F models.
*3 Both straight and cross cables are usable, irrespective of the presence or absence of a hub.
*4 Only for wireless LAN I/F models.
Clock and Backup Memory Specifications
* When using the unit at an ambient temperature other than 25 C, clock deviation may increase. Check and
correct the clock periodically.
USB Connector
(U-A / U-B)
USB mini-B
Applicable
Standards
Compliant with USB version 2.0
Baud Rate High speed 480 Mbps
Applications Screen program transfer, PictBridge-compatible printer connection
Ethernet Port
100BASE-TX /
10BASE-T
(LAN / LAN2
*2
)
Applicable
Standards
IEEE802.3u compliant (100BASE-TX), IEEE802.3 compliant (10BASE-T)
Baud Rate 10 Mbps, 100 Mbps
Protocol TCP/IP, UDP/IP
Functions Auto-MDIX, Auto-Negotiation
Recommended
Cable
*3
100 UTP (unshielded twist-pair) cable, category 5, max. 100 m long
Applications Screen program transfer, PLC connection, etc.
Connector for Wireless LAN Dipole
Antenna (WLAN)
*4
Reverse polarity SMA jack
SD Card Interface SD/SDHC card support
Communication Interface Unit Connector
(EXT1)
Communication interface unit “CUR-xx” (for SX-BUS, OPCN-1, T-Link, Ethernet,
CC-Link, PROFIBUS-DP, DeviceNet, and FL-net) connection
Connector for Optional Unit (EXT2) Optional unit “GUR-xx” (for RGB input, RGB output, and video input) connection
Audio Output Connector (AUDIO) 3.5 mm stereo mini jack
Item Specification
Item Specification
Battery
Coin-type lithium primary cell
(V9-BT manufactured by Hakko Electronics or CR2450S)
Backup Memory SRAM, 800 KB
Backup Retention Period Approx. 5 years (ambient temperature at 25 C)
Battery Voltage Drop Detection Provided (allocated the internal device memory address $s167)
Calendar Accuracy
*
When powered: Monthly deviation of 210 sec. (ambient temperature at 25 C)
When unpowered: Monthly deviation of 90 sec. (ambient temperature at 25 C, with
battery backup)