00198711-01_UM_X-Serie-S_EN.pdf - 第139页
Instruction manual SIPLACE X-Series 3 Technical data and assemblies From software version 713.0 Edition 11/2019 3.6 G antry syst em 139 3.6.4 Position of gant ries in SIPLACE X2 S 3 Fig. 3.6 - 4 Position of gantries - SI…
3 Technical data and assemblies Instruction manual SIPLACE X-Series
3.6 Gantry system From software version 713.0 Edition 11/2019
138
3.6.3 Position of gantries in SIPLACE X3 S
3
Fig. 3.6 - 3 Position of gantries - SIPLACE X3 S
(1) Y axis, gantry 1 and gantry 4
(2) X axis, gantry 1
(3) X axis, gantry 3 (covered)
(4) X axis, gantry 3
(5) X axis, gantry 4
(T) Direction of PCB transport
(1)
(5)
(3)
(2)
(4)
Instruction manual SIPLACE X-Series 3 Technical data and assemblies
From software version 713.0 Edition 11/2019 3.6 Gantry system
139
3.6.4 Position of gantries in SIPLACE X2 S
3
Fig. 3.6 - 4 Position of gantries - SIPLACE X2 S
(1) Y axis, gantry 1
(2) X axis, gantry 1
(3) X axis, gantry 2 (covered)
(4) X axis, gantry 2
(T) Direction of PCB transport
(1)
(3)
(2)
(4)
3 Technical data and assemblies Instruction manual SIPLACE X-Series
3.6 Gantry system From software version 713.0 Edition 11/2019
140
3.6.5 X axis structure
3
Fig. 3.6 - 5 Design of X axis - view of head mount
(1) Head mount with X axis linear motor (primary part)
(2) Y linear motor with fixed bearing (primary part)
(3) Guidance system with permanent magnet (secondary part of the X linear motor)
(4) End position bumper (4x)
(5) Gantry arm
(6) Head board mount
(7) Length measurement system
(4)
(3)
(1)
(5)
(2)
(6)
(4)
(7)