00198711-01_UM_X-Serie-S_EN.pdf - 第258页

5 Tasks at the placement machine Ins truction manual SIPLACE X-Series S 5.8 Shift changeover From software version 713.0 Edition 11/2019 258 5.8 Shif t changeover 5.8.1 Shif t changeover t asks  S plice the tapes early …

Instruction manual SIPLACE X-Series S 5 Tasks at the placement machine

From software version 713.0 Edition 11/2019 5.7 Indicator lamps with horn

257

5.7.2.3 Configuration of two-color indicator lamp and audio signal (optional)

Fig. 5.7 - 5 Configuration of two-color indicator lamp and audio signal

5 Tasks at the placement machine Instruction manual SIPLACE X-Series S

5.8 Shift changeover From software version 713.0 Edition 11/2019

258

5.8 Shift changeover

5.8.1 Shift changeover tasks

 Splice the tapes early. The feeder modules do not have to be refilled as soon as the new shift

starts. This minimizes extended down times.

 At the shift change, pass important information on to the next operator. This includes, for in-

stance, changes to the placement program. Also read through the list of the descriptions of

the steps to take in section 5

, page 231.

 Carry out a setup check.

Make sure that the feeder modules are equipped with the correct components, that they are

at the correct locations in the component trolley and that the conveyor increment is set cor-

rectly.

Clean the following line assemblies:

 Empty the reject bin and carefully vacuum the area around the reject bin.

 Carefully vacuum the nozzle changer, feeder modules and the component trolley.

 Empty the waste tape container. Follow the safety instructions given in section 5.8.2, page

259

 Empty the tray for the machine cover.

Instruction manual SIPLACE X-Series S 5 Tasks at the placement machine

From software version 713.0 Edition 11/2019 5.8 Shift changeover

259

5.8.2 Safety instructions for emptying the waste tape container

Fig. 5.8 - 1 Safety instructions for emptying the waste tape container

The waste tape container must be pulled out of the component trolley for emptying. There is a risk

of catching your thumbs as you do so.

 To avoid this risk, take hold of the underside of the grab recess on the waste tape container

with your fingers and place your thumbs on top of the grab recess.

 Do NOT put your thumbs in the gap between the tape container and waste tape container as

you could catch your thumbs if you do.