00198711-01_UM_X-Serie-S_EN.pdf - 第287页
Instruction manual SIPLACE X-Series S 6 Station extensions From software version 713.0 Edition 11/2019 6.1 Nozzle changer 287 6 S t ation extensions For the relevant configurations and othe r options, refer to the indivi…
5 Tasks at the placement machine Instruction manual SIPLACE X-Series S
5.14 Docking the component trolley in or out From software version 713.0 Edition 11/2019
286
Instruction manual SIPLACE X-Series S 6 Station extensions
From software version 713.0 Edition 11/2019 6.1 Nozzle changer
287
6 Station extensions
For the relevant configurations and other options, refer to the individual specifications for the SI-
PLACE placement machines.
6
6.1 Nozzle changer
The magazines are seated on a common support. They are centered with two parallel pins and
fixed in place with 4 push buttons. The exact position is determined with two fiducials on each
magazine. The correct seat of the magazines on the basic nozzle changer body is monitored by
microswitches, to prevent a collision of the placement head with any magazines projecting up-
wards. All magazine locations must be filled since the safety circuit stops the placement machine
in response to missing magazines or magazines that are not seated correctly.
PLEASE NOTE
When using the SIPLACE Smart Pin Support option, the maximum number of nozzle
changer magazines is reduced
6 Station extensions Instruction manual SIPLACE X-Series S
6.1 Nozzle changer From software version 713.0 Edition 11/2019
288
6.1.1 SIPLACE Speedstar C&P20 P / C&P20 P2 nozzle changer
6.1.1.1 Nozzle changer for C&P20 P / C&P20 P2 with 6 magazines
Item no. 03103514-xx Nozzle changer basic assembly CP/all - long
Item no. 03101503-xx Nozzle magazine 60xx/40xx with 20 garages
6
Fig. 6.1 - 1 Nozzle changer for the SIPLACE SpeedStar C&P20 P / C&P20 P2 with 6 magazines
6
CAUTION
6
Only use the nozzle changer together with the SpeedStar.